Subscribe to our
weekly newsletter

Latest Products and Breaking News

SERCOS III/Ethernet with Drive profile and synchronization for MAC motor and ServoStep

 

Ask an Application Question



You may attach a file for consideration:

No file selected

 
 

or

 

 

... sending ...

... please wait ...

 

JVL SERCOS III (Ethernet) with Drive profile and synchronization for MAC motor® and ServoStep®

JVL Industri Elektronik A/S, one of the world’s leading producers in the field of integrated servo and stepper motors, is announcing yet another industrial Ethernet protocol for its integrated servo motors and integrated stepper motors: SERCOS.

The new motor family, ServoStep, uses the newest technology and the advancement of the previous designs, incorporating customers’ feedback. The family has the widest pallet of options in the market and will thus fit into all possible customer applications.

Ready for Industry 4.0 and IIoT (Industrial IoT)

The JVL Sercos module is equipped with two Ethernet connectors and a built-in switch, enabling line and ring topology without any extra expensive hardware. The JVL Sercos module has several LEDs, enabling technicians and operators to get a quick status overview. There are also opto-isolated digital I/Os embedded in the module, enabling control of extra sensors etc. without external I/O modules. This minimizes the number of devices on the net and reduces cable costs.

All connectors are rugged M12 connectors suitable for the rough conditions in industrial environments.

Furthermore, all registers in the JVL MAC motor® are accessible via the Sercos connection, thereby enabling complete control of motor configuration and motion.

The JVL Sercos module is very easy to use and configure via a predefined setup, and commissioning is easy using the JVL MacTalk application software.

Sercos Industrial Ethernet

The JVL Sercos modules for MAC motor® and ServoStep® have all the important features from the Sercos specification. Automatic recognition of drives is supported by the FSPDrive and the Sercos Drive profiles (FSPDrive/PackProfile/SercosDrive). Synchronization is supported enabling simultaneous operation of up to 511 motors. Hot plugging and redundancy is possible for exchanging motors without power off. Probe/capture is supported enabling use also in packaging machines. JVL delivers SDDML files so the motor is recognized as FSPDrive by Bosch Rexroth. 
JVL’s Sercos motors are even found and recognized as SercosDrives without the presence of a SDDML file if you “scan” from the Bosch Rexroth development environment (IndraWorks). Read more here: www.Sercos.org.

Practical Features

Cabling is a hassle? Using the onboard Ethernet-switch you can daisy-chain cables from one Sercos motor to the next, enabling line and ring topology without any extra expensive hardware.

On the motor-side, one of the big advantages of using integrated servo motors or stepper motors from JVL, is that you do not need to install a separate servo driver or controller in a control cabinet. This gives you many subsequent advantages: Space savings in your control cabinet, saving of expensive motor and encoder cables, saving time (and money) for cabling, noise is minimized due to internal cabling, and installation errors between driver and motor are eliminated.

In addition, service is much easier, since the motor and controller can be replaced as a single integrated unit. Hence, downtime is minimized and production is maximized.

Quite uniquely on the market, users can even change Ethernet protocol by updating the firmware using the MacTalk software.

About JVL

JVL is a world leader within the development and production of efficient and compact integrated servo motors and integrated stepper motors. MAC motor® is a series of integrated brushless servo motors (up to 4500 W and 13.5 kW peak) and ServoStep® is a series of integrated stepper motors (up to 25 Nm). Both the servo motor and stepper motor series include motor, controller, Nano-PLC, encoder and bus system integrated into one compact unit. All industrial Ethernet protocols like Profinet, EtherNet/IP, EtherCAT, Sercos III, ModbusTCP and Powerlink are available.

 JVL has more than 25 years of motion control experience and is well known for its development and production of highly specialized integrated motors with industrial Ethernet and customized improvements. The close co-operation with customers and representatives results in cost-effective and technical optimized solutions for both basic and advanced motion control applications.

JVL's wide selection of quality products for motion control applications include: Integrated brushless Servo motors, Integrated Stepper motors, AC Servo motor controllers, Motor drivers (DC, AC and Steppers), Brakes, Gearboxes and HMI touch panels.

 

JVL Industri Elektronik A/S
Bregnerødvej 127
Birkeroed 3460
Denmark


JVL Industri Elektronik A/S is a leading company in the production and development of integrated AC servo- and stepper …
More about JVL Industri Elektronik A/S »

 
© Content credits: Some of this page uses material from www.jvl.dk .