|
Product ReleaseOES Offers Solenoid Control Electronics
 The following modules are available for immediate delivery; 1) Pick and Hold Module The Pick and Hold Driver Module is designed to avoid over heating of the solenoid coil, once it is energized. The pick time and hold voltage are variable and set using the onboard potentiometers. 2) Pick and Drop Module The Pick and Drop Driver Module applies a single pulse to the device, then drops the output voltage to zero. The pick time is set using an onboard potentiometer and can be adjusted up to one minute. 3) PWM Module The PWM Module is designed to enable the user to vary the voltage across a solenoid or other devices. The output voltage is proportional to the input control voltage. 4) Load On-Off Power Cycling Module The Load On-Off Cycling Module is designed to enable the user to cycle the voltage across a solenoid or other devices. The frequency of actuation, the output voltage. and the duty cycle of the actuation (ratio of on time to the length of one full cycle) are adjusted using the onboard potentiometers. We also offer complete system level electronics. |
Print
The Solenoid Control System is designed for Cycling and Endurance Testing of electro-mechanical components. The system may be used as both an engineering evaluation and production quality assurance tool. Each system may drive up to thirty two independent devices with different actuation profiles.
