|
|
Product ReleaseMicroMo Electronics' Offers a Small but Useful Stepper Motor That's Only 6 mm Print
 The ARSAPE product program has been extended with the development of this new stepper motor. With an excellent power to volume ratio, 6 mm outer diameter, 9.3 mm lenght, and weighing only an amazing 1.4 grams the new ADM 0620 is the smallest, produced in series, two phase stepper motor in the world.The motor is designed for voltages between 3 and 6 Volts (voltage regulated). The inertial moment of the rotor is a minimal 0.7 kgm2 •10-9, and the angular acceleration reaches 165 000 rad/s which means that a power rating between 125~250 mW can be achieved depending on the operating mode. The motors have a sintered bearing in the standard configuration but are also available with ball bearings. The operation temperature range is from –40°C up to 70°C. Various controllers are available for the motor and special controllers can be developed upon request to match any system. The modular complement, the 06/1 planetary gearhead, is also 6 mm in diameter. The precision gearhead has a steel geartrain and is made for operating temperature up to 100°C. Available reduction ratios are from 4:1 up to 4,096:1, providing a torque up to 35 mNm. Areas of application include precision medical instruments, optical instrumentation, security and inspection systems, microactuators and any application where the size, cost and reliability play a deciding role.
For more information please contact us.
Robust Planetary Gearheads with High Torque and Low Noise by Faulhaber / MicroMo
 MicroMo Electronics offers a wide range of planetary gearheads with diameters of from 6 mm to 44 mm. Motor lengths vary from 21.9 mm to 214.0 mm with shaft diameters of 1.0 mm to 10.0 mm. Planetary gearheads reduction ratios range from 3.7:1 to 23.104:1 . Maximum input speed range from 3,500 rpm to an impressive 8,000 rpm. Continuous torque is from 25 mNm to 16,000 mNm with intermittent torque of 35 mNm to 20,000 mNm.Faulhaber's MicroMo Electronics specializes in precision micro drive systems with extensive know-how, customer focus and highly competent R & D and production engineering staff. ...More >> MicroMo Electronics Piezo Motor Family Drives Applications
 MicroMo Electronics, Inc. announces the addition of a family of linear and rotary piezo motors to its product offering. The simple, cost-effective, robust designs meet the needs of applications from consumer electronics to metrology instrumentation. The Piezo LEGS® and PiezoWAVE™ motor lines eliminate common problems and offer new possibilities. Interfacing piezo-electric material directly with the output drive allows backlash-free positioning down to nanometer or microradian resolution and eliminates the need for gearboxes, leadscrews, nuts, and other fragile transmission components. ...More >> DC Motor - Low-cost Powerhouse by MicroMo Electronics
 22mm Low-cog DC Micromotor with Graphite Commutation Micro-Drives announces the Series M2232U. The low-cog DC micromotor has an 22 mm external motor-diameter with a 32 mm length. The low-cog rotation is achieved through a combination of skewed laminations and a tapered permanent magnet system. The DC micromotor can achieve a stall torque of 25.62 mNm and speeds of up to 10,000 rpm. ...More >> MicroMo's 12mm Miniature Stepper Motor - High Precision with Every Step
 MicroMo Electronics, Inc. announces the expansion of its miniature stepper motor product line with the addition of its Series ADM1220S. The miniature stepper motor has an external motor-diameter of only 12 mm and a length of 17.2 mm. The ADM1220S has a holding torque with current of 2.4 mNm and can achieve a high boost torque of 4.1 mNm. The ADM1220S offers 20 full steps per revolution in full step mode and is capable of 160 microsteps per revolution with a maximum error of +/- 0.2º at speeds ranging from 10 rpm to 6000 rpm ...More >>Powerful, Lightweight Brushless DC Motor by MicroMo Electronics
 Ø3mm Brushless DC Servomotor MicroMo Electronics, Inc. announces the expansion of its Brushless DC motor product line with the new version of the Smoovy Series 0308…B. This new version of the brushless DC motor uses the “System FAULHABER” skewed winding in combination with a rotor made of Neodymium rare-earth magnets to provide cog-free motion. ...More >>DC Motor - Rapid Prototyping with Micro Brushless DC Motors
 Starter Kit for Micro Brushless DC Motors MicroMo Electronics, Inc. announces the release of a Microsystems Starter Kit with Synchronous Drive Systems. The Microsystems Starter Kit contains drive electronics, an adaptor board, and a motor and was developed to allow a design engineer to simply and quickly get started with a MicroMo miniature synchronous motor. The Microsystems Starter Kit is available with DC Brushless motors series 0206…B, 0308…B and 1202…BS/BH. ...More >>FAULHABER's DC-Micromotors have a Self-supporting Skew-wound Copper Coil
 The main difference between FAULHABER DC-Micromotors and conventional DC motors is in the rotor. The winding does not have an iron core but consists of a self-supporting skew-wound copper coil. This featherweight rotor has an extremely low moment of inertia, and it rotates without cogging. The result is the outstanding dynamics of FAULHABER motors. For low power motors, commutation systems using precious metals are the optimum solution because of their low contact resistance. ...More >>Micro-Drives Expands Its DC Micromotor Product Line with the Addition of the Series M4870U
 The DC micromotor has an external motor-diameter of 48 mm and a length of 70 mm. The DC micromotor can achieve a stall torque of 42.7 mNm and speeds of up to 11,000 rpm. The DC micromotor has an iron-core construction and possesses a graphite commutation systemwhich ensures long-life even under overload conditions. The 4.0 mm diameter motor shaft ensures high rotational stability. The Series M4870U DC Micromotor can be combined with a gearhead, encoder, and linear actuator for a complete miniature DC drive system. ...More >>Stepper Motor - Miniature Stepper Motor from MicroMo Electronics
 Precision with every Step in 12mm Miniature Stepper Motor MicroMo Electronics, Inc. announces the expansion of its miniature stepper motor product line with the addition of its Series ADM1220. The miniature stepper motor has an external motor-diameter of only 12 mm and a length of 17.2 mm. The ADM1220 has a holding torque without current of 2.4 mNm and can achieve a high boost torque of 4.1 mNm. ...More >> Gearheads - 8MM Precision Zero-Backlash Spur Gearhead
 Precise Repeatable Zero-Backlash Positioning MicroMo Electronics, Inc. announces the addition of a metal spur zero backlash gearhead with the release of the Series 08/3. The zero backlash spur gearhead is ideal for applications requiring precision positioning with high resolution and low torque requirements. The gearhead weighs a mere 4.5 to 5.7 grams ...More >> DC Motor - Brushless Dc Servo Motor by MicroMo Electronics is Powerful and Sterilizable
 20mm Brushless DC Servomotor MicroMo Electronics, Inc. announces the expansion of its Brushless DC motor product line with the addition of its Series 2057...B. With an external motor-diameter of only 20 mm and a length of 57 mm, the power to volume ratio is truly impressive. ...More >>Motor Controller - DC Motor 4 Quadrant PWM with RS232 and CAN Interface
 MicroMo Electronics, Inc. announces the release of the series MCBL/MCDC 3006 C/S compact motor controller. The MCDC 3006 is for use with DC micromotors. The MCBL 3006 is for use with brushless DC motors. A printed circuit board version of the controller is available for superordinate systems for OEM applications. This version is the MCBL 3003 or the MCDC 3003. The compact motion controller can be operated with a RS232 or CAN interface. The CAN interface allows for networked control of up to 127 drives. The configuration of the electronics is based on a digital signal processor (DSP) which provides high performance as well as precise positioning and very low speeds. ...More >>Small and Powerful - 12mm DC Micromotor with Precious Metal Commutation
 MicroMo Electronics, Inc. announces the expansion of its DC Micromotor product line with the addition of its Series 1224...SR. With an external motor-diameter of only 12 mm and a length of 24 mm, the power to volume ratio is truly impressive. This is achieved through a combination of the "System FAULHABER" ironless rotor and Neodymium rare earth magnets to achieve a stall torque of 5.43 mNm and speeds of up to 13,800 rpm.
...More >>
Precision Gearhead Series 13A by Faulhaber / MicroMo Electronics
 Powerful Featherweights Stepper Motor - MicroMo Electronics' AM 1020 Miniature Stepper Motor has a 5 Micron Linear Resolution
 The AM 1020 two phase stepper motor delivers an impressive 0.23 oz-in of holding torque and has temporary boost capability of 0.34 oz-in. It sports a robust 2 mm diameter 0.2 mm/revolution lead screw. In the half step mode 5 microns of linear resolution is possible. Even greater resolution if microstepped. Peak mechanical output power exceeds 0.5 Watts. With the AM 1020 two phase stepper motor a two channel 10 line per revolution magnetic encoder is optional ...More >> Hall Effect Sensor - Three Hall Sensors Detect Rotor Position by Evaluating Its Magnetic Field
 MicroMo Electronics' 44mm Is Its Most Power and Efficient Series of Miniature Drive Systems Ever With over 200 watts output, these brushless DC Servomotors from FAULHABER, are true prime movers considering their relatively small size of just 44mm diameter and 90mm length. This is made possible by combining a skew wound ironless rotor coil (system FAULHABER) with a very powerful Neodymium magnet. Thanks to their brushless commutation, the small motors have a very long useful life. ...More >>Pancake Motor - MicroMo Electronics has Powerful Ultra-Flat DC Motors
 MicroMo Electronics has Powerful Ultra-Flat DC Motors MicroMo Electronics, Inc. announces the addition of two new powerful, ultra-flat DC motors to its product line. The motors are 15 and 26 mm in diameter with a housing length of 5 or 7 mm. The motors possess an outstanding power to volume ratio and can achieve a constant torque of up to 3 mNm and speeds up to 10,000 rpm. The low overall height is enabled by the ironless rotor with three flat, oval coils. ...More >> MicroMo Offers a Ultra-compact 13mm Brushless DC Gear Motor
 MicroMo Electronics, Inc. announces the addition of an ultra-compact brushless DC gear motor with the release of the Series 1307…BH and 1309…BH. The 1307…BH brushless gear motor has a diameter of 13 mm and a length of 7 mm and can achieve a continuous torque of 5 mNm with speeds up to 1,639 RPM. The 1309…BH brushless gear motor has a diameter of 13 mm and a length of 9 mm and can achieve a continuous torque of 5 mNm with speeds up to 592 RPM. The gear motor rotor is produced photolithographically rather than mechanically as is common in other motors. This allows for precise, synchronous operation without cogging. A maximum torque output of 10 mNm is achieved by the use of high-quality neodymium magnets. Due to their electronic commutation, the service life of these motors is only limited by the bearings. This makes these motors extremely useful for applications requiring a long service life or continuous operations such as micro-scanners, locking systems, chopper drivers, and medical dosing pumps.
...More >>
Electronically Commutated Endurance Runner by MicroMo Electronics
 Ø15mm and Ø31mm Brushless DC Micromotors with Integrated Electronics MicroMo Electronics, Inc. announces the addition of a RoHS compliant line of brushless DC micromotors with integrated electronics with the release of the Series 1525…BRC and 3153…BRC. The 1525...BRC motor has a diameter of 15 mm and a length of 25 mm and can achieve a continuous torque of 1.8 mNm with speeds up to 16,000 RPM. The 3153…BRC motor has a diameter of 31 mm and a length of 53 mm and can achieve a continuous torque of 28 mNm with speeds up to 6,500 RPM. The motor uses the “System FAULHABER” skewed winding in combination with a rotor made of Neodymium rare-earth magnets to provide cog-free motion. Due to their electronic commutation, the service life of these motors is only limited by the bearings. This makes these motors extremely useful for applications requiring continuous operations such as pump, fan, or scanner drives.
...More >>
MicroMo Electronics Offers a New Family of Mini-Drives Providing Maxi Power with an Outer Diameter of Only 8mm  It is an impressive solution with a wide variety of combination possibilities using DC-Micromotors, with precision gearheads and micro-encoders.
DC-Micromotors 0816 ... S
The DC-Micromotors series 0816 ... S, available in 3, 6 and 8 Volt versions, have an exceptional power-to-volume ratio. The patented ironless rotor (System FAULHABER), with its low inductivity and extremely low inertia, is truly remarkable. Its impressive specifications include no-load speed up to 17 100 rpm, stall torque of 0.41 mNm and output power of 0.18 Watt.
Precision Gearheads 08/1, 08/2 and 08/3
Three all-metal precision gearheads are available. The 08/1 series planetary gearhead allows maximum drive torque of 60 mNm in continuous operation and 120 mNm in intermittent operations.
The two new 08/2 and 08/3 series spur gearheads, available in two executions, convince with their compact design and quiet operation. The 08/3 zero backlash spur gearhead is indicated for positioning control applications.
...More >>
MicroMo Electronics Offers the AM 2224, a Compact Powerhouse 22 mm Stepper Motor  MicroMo is presenting a new 2-phase Stepper Motor with a diameter of 22 mm and a very high power-to-volume ratio. The AM 2224 achieves an output of 2.5 W and a peak holding torque of 45 mNm – a superior performance for this frame size (Ø 22 x 25.9 mm).
There are 3, 6, 12 and 24 Volt versions available as well as 0.25 A and 0.50 A. The motor processes the transmitted control signals with extreme accuracy. This allows an angular step of 18° (even smaller in micro-stepping). In an open control loop this makes it possible to run rotary speed profiles or build up a positioning control. The use of expensive servo components can usually be avoided. After switching off, the motor maintains its present position exactly.
Like brushless motors, stepper motors do not have any mechanical commutation, so service life is only limited by the bearings.
...More >>
MicroMo Electronics Offers a Powerful Yet Small 10mm DC Micromotor with Precious Metal Commutation  MicroMo Electronics, Inc. announces the expansion of its DC Micromotor product line with the addition of its Series 1024-S. With an external motor-diameter of only 10 mm and a length of 24 mm, the power to volume ratio is truly impressive. This is achieved through a combination of the "System FAULHABER" ironless rotor and Neodymium rare earth magnets to achieve a stall torque of 2.89 mNM and speeds of up to 14,700 rpm. The precious metal commutation allows operation at low starting voltages due to inherent low contact resistance. The 10 mm diameter motor shaft ensures high rotational stability. The housing of the motor is black to facilitate optimum heat dissipation.
...More >>
MicroMo Electronics Offers Miniature Stepper Motors with Lead Screws as Fine as 4 Microns per Half Step  MicroMo Electronics, Inc. announces the addition of lead screw output shafts to complement the ARSAPE ® line of miniature two-phase stepper motors for precise linear actuation. The lead screw shafts are press fitted directly to the motor’s rotor. This design eliminates the need for shaft couplers, saving both time and money.MicroMo Electronics, Inc. offers miniature stepper motors with diameters of 6 mm, 8 mm, 10 mm, 12 mm, 15 mm, and 22 mm. Standard lead screws offered for combination with these motors include the low friction torque M 1.2 x 0.25 mm, the extra fine M2 x 0.2 mm, and the M3 x 0.5 mm. The lead screws are available in various lengths and come with optional self lubricating nuts. The shaft tips are configured to accept a ball bearing for additional shaft support.... ...More >> MicroMo Electronics / FAULHABER Offers the New 0620 B Series, a Brushless DC-Servomotor with a 6mm Diameter  Brushless DC-Servomotors:This new, electronically commutated DC-Servomotor has even better dynamic characteristics and effective output power than the brush-commutated DC-Micromotor. With rotor inertia of only 0.0095 gcm2, the 0620 B series achieves a continuous torque of 0.33 mNm. The companion drive electronics required for operating the motor allows the no-load speed to be as high as 50,500 rpm. Despite its high performance, this type of motor has an especially long service life and is ideal for a variety of industrial applications.... ...More >> Faulhaber's MicroMo Electronics Adds The New 2232 SR Series Of Drives To Its Range DC MicroMotors With Integrated Encoder  The motor, featuring a diameter of 22 mm, a length of 32 mm and an NdFeB magnet, boasts an exceptionally high constant torque of 10 mNm.With an output power of over 9 watts, it is particularly well suited to demanding applications. What’s more, because of its precious metal commutation, it can also be used for the extremely low starting voltages. The IE2 series magnetic encoder integrated into the miniature motor is insensitive to dust, dirt or light incidence – and adds a mere 1.4 mm to the overall length of the motor. This cutting-edge solution offers two quadrature signals (90° phase shift) and up to 512 pulses per revolution per channel, thus combining the world’s highest resolution with the smallest footprint for motors equipped with magnetic encoders. The addition of an ... ...More >> MICROMO ELECTRONICS / FAULHABER's 4490 Brushless Motor Comes in Both the Original Delta Wound Version and the New Star Wound Version  The number “4490” means that the motor is 44 mm diameter by 90 mm long. The 200 Watt motor has the combined benefits of the skew-wound System Faulhaber coil and a rare earth (NdFeB) magnet.The delta wound version should be considered for higher speed applications. The star wound version offers a higher torque output to current consumption ratio. Available with the 4490 motors are precision gearheads, encoders, and drive electronics. To ask an application question or to request additional product information, please contact MicroMo through the link provided below.... ...More >> MicroMo Electronics' Next Generation of 13mm Faulhaber DC Micromotors Are Here
 They come in two sizes, 19mm long and 31mm long and six different voltage versions. They feature a high neodymium magnet for increased torque and better performance over their available power range. The all steel motor casing increases mounting stability and provides optimum magnetic feedback to maximize the available magnetic flux. They come available with sintered sleeve and preloaded ball bearings for differing load conditions.The integrated IE2-400 high resolution magnetic encoder adds a mere 2.4mm in length to the motor and provides 2 channel quadrature output with a resolution of up to 400ppr per channel or up to a maximum of 1200 lines per revolution. A extensive line of gearboxes including planetary, spur and zero backlash are available. ... ...More >> MICROMO ELECTRONICS/FAULHABER Offers Its New 06mm Series of Ironless DC Motors  The new 06mm series from Faulhaber is small and light, but powerful. The ironless DC-Micromotor 0615 is only 6 mm diameter and 15 mm length.The 06mm Series is available in 1.5, 3 and 4 volts, with a no-load speed of up to 19,000 rpm and stall torque of 0.23 mNm and output power of 0.12 Watts. The 06mm Series may be matched to an in-line Planetary Gearhead with a all metal design for operating temperatures of up to +100°C, available in ratios of 4:1 up to 4,096:1. The 06mm Series maximum output torque in continuous operation is 25 mNm (3.54 oz-in) and in intermitted 35 mNm (4.96 oz-in). Please contact us through the link provided below to obtain information about this and other FAULHABER products.... ...More >> MicroMo Electronics has the 26mm Series Micromotors from Faulhaber That's Best in Class  DC-Micromotors 2642 and 2657 have Graphite commutation.The powerful new 26mm (1.02") diameter series DC-Micromotors compliments the extensive FAULHABER line of graphite commutated coreless motors with outer diameters from 13-38mm (.51"-1.49"). In combination with the gearhead series 26/1 these drives lay claim to the title “Best in Class” due to the exceptional 44W of output power and a continuous torque rating of 3.5Nm (496 oz-in). The motor have extremely high efficiency and excellent dynamic response due to patented System Faulhaber( skew wound ironless rotor in combination with a NdFeB (rare earth) magnet. The precision gearhead series 26/1 are a planetary design and very robust due to the all metal construction. The reduction ratios range from 3.71:1-1526:1 with avai... ...More >> MicroMo Electronics has the New Low Cost MD1622 Motor with Precious Metal Brushes  The new 16mm (.63") diameter series DC-Ironcore motor complements the Micro-Drives product line of precious metal and graphite commutated iron core motors with outer diameters ranging from 12-48mm (.472" - 1.89"). The MD1622 series motor is capable of delivery up to 0.14 oz-in of continuous torque.In combination with planetary gearbox series MD15P this gearmotor is capable of continuous torque up to 56.6 oz-in. The precision gearbox series MD15P are of planetary design and very light weight due to the plastic gear design concept. Reduction ratios range from 19:1 up to 23,014:1 to meet any speed reduction or torque-boosting requirement. · No load speeds up to 12,900 rpm · Available in 4.5, 7, and 12 vdc The motors are available in a wide variety of voltage types and are ide... ...More >> MicroMo Electronics Adds a New 32MM Series to Its Motor Line Featuring Various Voltage Configurations&Encoder/Drive Combos  The new powerful miniature DC-Micromotors with an outside diameter of 32 mm and lengths of 42 mm and 57 mm supplement the proven series of graphite-commutation FAULHABER motors from diameter 13 mm up to 38 mm.The ironless rotor coil, System FAULHABER, and the NdFeB magnets provide the motors with excellent dynamic response and very high levels of efficiency. With a power output of up to 84 W and continuous torque up to 7 Nm with gearhead, these drives rank among the strongest in their class – featuring an exceptionally high power-to-volume density. The 32/3 planetary gearhead is a robust all-metal design with 11 different reduction ratios from 3.71:1up to 1526:1. Together with the motors featuring various voltage configurations and supplemented by other FAULHABER components, such... ...More >> |
|
|
|