|
Product ReleaseMICRONOR Offers High Resolution, Hollow Shaft Fiber Optic Encoder for Harsh Environments
 Micronor’s new MR314 ZapFREE™ High Resolution Fiber Optic Rotary Encoder was designed for large drive and rotary shaft applications requiring EMI immunity, higher resolution (1024ppr) and the mounting convenience of a traditional hollow shaft encoder package. There are no integral electronics within the encoder housing and the all-optical design requires just a single optical fiber connection – the utmost in simplicity, reliability and ease of installation. The MR314’s totally passive design outperforms conventional optical and magnetic rotary encoders over a wide range of harsh and/or hazardous environments: wide extended operating range (-60°C/+150°C); outdistances copper cable; intrinsically safe and ATEX-compliant; immune to EMI/RFI and ground loops; unaffected by high magnetic fields; and radiation resistant. Special versions can be easily engineered for thermal-vac environments. The “passive” MR314 optically links to the “active” MR310 ZapFREE™ Remote Encoder Interface (REI) Module via a single 62.5/125 multimode fiber link – up to 1000 meters (3280 feet) away. With its convenient DIN-rail mount, the MR310 module is co-located with the PLC or other system interface electronics where power supply connections and conventional electrical interface connections are easily made. The module offers a wide range of standard interfaces: direct quadrature outputs (both open collector and line driver), separate multiplier/divider quadrature outputs, two fully-programmable analog outputs (4-20mA and +/-10V), and PC-friendly RS232/RS422/RS485 serial interface. In addition to the MR312/MR314 native incremental encoder mode of operation, the MR310’s firmware also allows the encoder to emulate a multiturn absolute encoder. The internal 24-bit counter can track up to 32,768 revolutions of the 1024ppr MR314 or 23,201 revolutions of the 360ppr MR312. Either a software command or TTL signal input to the MR310 establishes a Calibration or Zero reference (reseting the counter to zero). An external battery back-up is required to maintain operation during power interruptions. A combination power supply/back-up battery trickle charger is available. Capacity of the battery determines the amount of back-up time. Like the original MR312 Shafted Fiber Optic Encoder, all MR3XX series encoders utilize telecom-proven WDM (wavelength division multiplexing) technology by assigning each internal optical path (A or B) to a wavelength so that all wavelengths/paths can be combined onto a single fiber (patent pending). It was deliberate to avoid the use of multiple fibers as this tends to drive up the cost of the optical harness. A single-fiber cable is inherently more cost effective and more reliable than any multi-wire or multi-fiber or hybrid cable assembly - and easier to handle and install as well. It just doesn’t get any simpler. A ZapFREE™ Encoder Engineering Evaluation Kit (MR314, MR312, Fiber optic cable and User Guide) is available for $3495. Larger quantities of both MR314 and MR310 can be as low as $2500. For custom applications, the MR310 firmware can be enhanced with additional functions and modes of operation to offload previous forms of remote processing for more efficient system operation. Special size shaft bores can also be accommodated. Typical delivery is stock to 4 weeks ARO for standard configurations. About Micronor Micronor is a leading supplier of reliable and rugged components for industrial automation and process control industries as well as military, aerospace and other harsh/hazardous environment applications. Motion control products include encoders, resolvers, cam timers, programmable limit switches, motorized potentiometers, pulse generators and ergonomic pendant stations. Micronor was founded in 1968 and has regional headquarters in both the United States and Europe. Contact Information: Dennis Horwitz Vice President, Sales & Marketing Micronor Inc. 3483 Old Conejo Road, Suite 203 Newbury Park, CA 91320 USA Tel: (805) 499-0114 Fax: (805) 499-6585 Email:dennis.horwitz@micronor.com www.micronor.com |
Print
This new Micronor product provides a simple and inexpensive solution for automating existing systems controlled by manually-operated potentiometers, rheostats or rotary cam switches. Motor Pots may not seem like a sexy control product but they fulfill a wonderful niche in process control! They are simple to use and easy to set up. No computers required or software to write. Easy to maintain and never obsolete. The user-specified potentiometers provide absolute positional feedback information or function as a variable resistor in an analog control or bridge circuit. The motor pot provides a smooth uniform ramp throughout its timing cycle. Rotary limit switches are programmed (via cams) to electrically control events (or provide status) at pre-stages. A few common applications include ramping up the field current of a DC motor or controlling the start-up of a generator.
Micronor’s MR310 ZapFREE Remote Encoder Interface (REI) Module is the system interface end of the ZapFREE Fiber Optic Rotary Encoder system – for motion control applications in harsh and hazardous environments.
Micronor’s new MR312 ZapFree Incremental Rotary Encoder (patent pending) is the world’s first commercially-available, entirely passive encoder for rotation sensing applications. There are no integral electronics within the encoder housing and the all-optical design requires just a single optical fiber connection – the utmost in simplicity, reliability and ease of installation. The MR312 offers immunity to lightning and atmospheric static that would “zap” conventional encoders; outdistances copper cable by allowing link lengths to 1000 meters (3280 feet); its inert nature proves ideal for use in hazardous and explosive environments; and its intrinsic EMI/RFI resistance allows for safe and reliable operation in and around medical equipment and other “noisy” industrial environments.
Extends Reach Between Controller and Encoder
Micronor’s new MR121 Encoder Cable is guaranteed to solve nagging ground loop and interference problems in motion control systems. The product uses Micronor’s ZapFREE technology which employs the use of fiber optic technology within the cable assembly, but in a manner completely transparent to the user. The MR121 product looks and functions like a standard electrical encoder cable. The equipment operator simply disconnects the existing controller-to-sensor connections and replaces them with corresponding MR121 ZapFREE Encoder Cables. No engineering redesign is required or needed.
