|
Product ReleaseLinear Actuator - Long Travel Motorized Linear Slides by Zaber
 Zaber Technologies Inc. is proud to announce the launch of its T-LSR series of computer controlled motorized linear slides. These slides extend the range of Zaber’s line of precision motion control products offering travel up to 300mm with resolution down to 0.25 um. Zaber’s fastest and strongest slides, the T-LSR series can handle loads up to 20kg at speeds up to 20mm/s. Multiple T-LSR slides may be mounted in x-y or x-y-z configurations without any additional hardware. They are also compatible with our T-LS series of precision motorized ball bearing stages which offer higher resolution over shorter travel. Integrated motors and controllers allow T-LSR slides to be daisy chained with other Zaber products and controlled from a single USB or RS232 serial port. Demo control software for a variety of programming environments is available for free download from the Zaber website. A knob at the end of each T-LSR units permits smooth manual control. For manual operation, the stage need not be connected to a computer. However, if connected to a computer, stage position can be tracked and displayed during a manual move. About Zaber: Zaber Technologies Inc. was founded in 1997 when precision motion control was typically accomplished with DC motors and encoders, requiring complicated, cumbersome and expensive controllers, amplifiers and power supplies. In 2000 Zaber introduced the first daisy-chainable miniature linear actuator based on stepper motor technology with integrated RS232 communications and control electronics in one small package. Since then Zaber has added over 120 products to its family of precision motion control and laboratory automation devices including linear actuators, linear slides, motorized x-y-z stages, rotation stages, motorized mirror mounts, and micro-stepping motor controllers. |
Print
Zaber Technologies is proud to present its T-LS linear stage, a 0.1 um resolution motorized linear stage available in 13mm and 28mm travel versions, with either metric or imperial mounting holes. These linear stages can be controlled manually or through an RS232 or USB port. In addition, they can be used in x-y or x-y-z configuration with our AB90 angle brackets. An x-y configuration makes an excellent microscope stage, especially when combined with our T-JOY3 Joystick Controller...
