|
|
Product ReleaseJVL INDUSTRI ELEKTRONIK A/S has a New Step Motor Driver - The SMD41 Mini-Step Driver Gives Smooth Motor Operation Print
 Mini-step Driver SMD41 from JVL has had great overall success. It fulfils the requirements for a small compact unit which is easily incorporated into control systems. It is available in 3 - 6 and 9 A models, all with a supply voltage of between 15 and 80 Volt. In addition, a range of Drivers with various step resolutions are available: models with full-step, half-step, 1/4 and 1/8 step, and models where resolution can be selected between 10, 25, 50 and 125 ministeps. Thus resolutions up to 25000 ministeps/revolution can be obtained. All models are supplied with the special feature of selectable step curve sequencing which provides optimum matching for different types of step motor.The use of ministeps instead of the more commonly used full or half step gives significantly smoother motor operation and excellent positioning accuracy. These drivers provide many additional advantages: error output, optically isolated inputs and outputs, automatic switching between operating and stand-by current, and a facility for external control of current. These features make them universally applicable for many tasks in the field of motor control. As standard, the Ministep Drivers are constructed for mounting on a heat sink or a machine in proximity to the motor, thus avoiding long cabling. The drivers can also be supplied mounted on a heat sink for mounting in Eurocard racks and for mounting in a control cabinet.. For further information on these ministep drivers contact: JVL Industri Elektronik A/S through the link below.
For more information please contact us.
DeviceNet Expansion Module for JVLs integrated MAC motors
JVL, now represented in Ohio, USA, has developed a new module for the MAC50-141 and MAC800 series of integrated servo motors that enables the MAC motors to be used on Devicenet. The AC-servo motor, encoder, amplifier, positional controller and Devicenet are all built into the motor. The only connections required are a supply voltage and the Devicenet cables. The device type is a "Position controller", which is a standard method for controlling position when motion control is used on Devicenet. A double-supply facility is available so that position and parameters are maintained intact for example during an emergency stop. Via Devicenet it is possible to access all of the MAC motor's registers.
At no additional cost, the Expansion Module is supplied with EDS files, function blocks and program examples for the most commonly used Devicenet PLCs from Omron and Rockwell. The function blocks are fully documented so they can be readily adapted for use with other PLC types. ...More >>New JVL OCX-driver – Makes programming easy
 JVL has developed an OCX-driver for JVL MAC050-141, MAC800 and QuickStep motors and Controller SMC75 for use in programming applications in LabView, Excel, Visual Basic, Visual C++, Visual.Net, Delphi and Borland C++ Builder, etc. The new OCX driver makes it easy to create complex applications in a quick and simple way. ...More >> JVLs Integrated MAC Motor with Power Rating up to 750W
 JVL, which is the European leader in the development of new servo- and step motor technology, has again developed a new, unique product in the field of integrated motor control. JVL's new additions to the fold comprise two complete, recently developed, high-capacity MAC Servo Motors with ratings of 400W and 750W. ...More >> JVL Nano-PLC Module for JVL MAC Motors
 JVL's nano-PLC module, which is compatible with all JVL MAC motors, has now been updated to provide extended functionality. The new features include a "Calculator" with +, -, *, and / operators via which all motor registers and variables can be included in calculations. ...More >> Application Story - Ergonomic Baggage Lifter Uses Wireless Control by JVL
 Swedish company EBL Systems AB uses JVL Bluetooth control of MAC motors Swedish company EBL Systems AB is a well-known supplier of ergonomic baggage- and industrial material handling systems. ...More >>JVL's QuickStep and MAC motor drawings now available in 2D and 3D for CAD
 In our continued efforts to support customer requirements, we have now made 2D and 3D drawings of the popular QuickStep stepper motors and the MAC integrated servo motors available for download from our website, www.jvl.dk. The drawings now cover our entire MAC motor program with power ratings from 50W to 141W as well as the MAC800 motor with and without brake. For the QuickStep motors the drawings show the possibilities for configuring the motors and the communication interface possibilities. ...More >> MAC800 Motors in IP65 (Waterproof) Models by JVL
 JVL informs that, like the smaller MAC50-141 (46 to 134W) motors, JVL’s large MAC800 motor (750W) is now available in a model that offers IP65 protection. This makes the MAC800 well-suited for applications in more demanding environments such as are common in the food processing industries. The IP65 protection of the ac motor has been achieved by replacing the ventilator built into the cooling fins with large fins. In addition, a water-tight seal of the axle bearing has been achieved using an IP67 Rulon® Teflon bush. This has very low friction and requires no lubrication. ...More >>Servo Motor - New WLAN Module for JVL’s MAC-Motors
 Wireless connection to existing Ethernet A very wide range of integrated AC servo motors makes JVL a leading supplier in the field of motion control. The numerous features of these motors include a unique modular concept that makes it extremely easy to adapt the motors to a large number of applications. Plug-in expansion modules are used to adapt a motor to the application. ...More >>Servo Motor - UL Recognized Servo Motors
 JVL MAC800 motors now UL recognized The very popular MAC800 integrated servo motor has now been UL recognized according to UL (Underwriters Laboratories Inc.®) standard UL508C (Power Conversion Equipment) and related sub-standards. The UL508C standard covers fundamental personal safety and precautions to avoid overheating and fire. ...More >>Servo Motor - New Bluetooth Module for JVL MAC Motors
 A range of integrated AC servo motors makes JVL a world leader in the field of motion control. The numerous features of these motors include a modular concept that makes it extremely easy to adapt the motors to a very wide range of applications. JVL now introduce the first wireless integrated servo motor. Module MAC00-FB4 facilitates wireless control of the MAC motors, giving total freedom from cables. The new module makes it possible to have a direct BlueTooth connection to the motor. ...More >>Stepper Motor - QuickStep Integrated Stepper Motors From JVL
 Since the introduction of the integrated AC servo motor, the MAC motor, there has been a great deal of interest in these motors. This is because the benefits of integrating the driver and controller in the motor unit are so numerous. QuickStep is a new series of integrated step motors from JVL. They are available in a wide range, offering various functionality and combinations. The basic unit is a high-torque step motor with flange dimensions of 57x57 mm (NEMA23). The housing is constructed to provide IP55 or better protection. One or more PCBs and various connectors can be mounted in the housing to provide the various models. Servo Motor - Modules for Integrated AC Servo Motors
 JVL Industri Elektronik A/S, a Danish company, announces a new expansion, CANopen, module for their MAC, Integrated AC Servo motor. The CAN module offers: • Control and setup • Logic I/O for high speed start/stop • CANbus/CANopen 3.02 • CANopen 4.02 and DeviceNet under development The module can be delivered with integrated cable with watertight connections for use in harsh environments or be delivered with M12 connectors ...More >> MAC800 Integrated Servo Motor Drawings Now Available in 3D for CAD from JVL Industri Elektronik A/S  In our continued efforts to support customer requirements, we have now made 2D and 3D drawings of the popular MAC 800 integrated servo motors available for download from our website, www.jvl.dk. Drawings are available for both the MAC800-D1 (motor without brake) and MAC800-D4 (motor with brake).
The drawings are available in the following formats: DXF, IGES and STEP, to suit most customers’ needs. All drawings are dimensionally correct and to scale. This new service will be followed up by drawings of other items in the MAC range of integrated motors and will greatly simplify and speed up the construction process for our customers.
For further information, contact: JVL Industri Elektronik A/S, Blokken 42, 3460 Birkerød, Denmark, tel. +45 45 82 44 40. E-mail: jvl@jvl.dk
...More >>
JVL Industri Elektronik Offers Multi-axis, 460kbit, High-speed RS485 Interface for MAC Integrated AC-servo Motors  JVL Industri Elektronik A/S is a well-known Danish manufacturer of servo- and step motor controllers. A range of integrated AC servo motors makes JVL a world leader within motion control. The numerous features of these motors include a modular concept that makes it extremely easy to adapt the motors to a very wide range of applications. JVL now announces another new expansion module (MACOO-FS1) for these integrated MAC motors. It can be used in multi-axis, high-speed applications with up to 255 units on the same RS485 bus with repeaters. 4 inputs and 2 outputs, position, error status, etc., are scanned locally and can be read very quickly from a PC or PLC. For example, 16 motors can be scanned in just 12ms. New positional data can be sent to 255 motors in just 133 ms. This is a very important feature in machines where multiple axes must be adjusted quickly and simultaneously. All motor parameters can also be read/written, and a group command can be used to write to several motors simultaneously. All 24V I/O and RS 485 are galvanically isolated to ensure error-free function. 2 of the 4 inputs can be set up as a limit switch.
...More >>
JVL Offers MAC 800 Series Integrated AC Servo Motors (with brake)  The MAC motor is available in 2 sizes. The smaller 50, 95, 140 or 141W, and the bigger 750 W. Both have 3 times peak power; up to 1.59kW (MAC141) and 7.1 Nm is possible (MAC800). The motors use standard flanges so the MAC motors can directly replace a step motor without mechanical modification. Motor parameters are set-up and programmed via an RS232 or RS485 port using Windows software MacTalk.
Numerous Advantages:
There are many benefits achieved from having the intelligence at the device level.
• Reduced material costs
Because the drive and controller are in the motor most cabling to a control panel is eliminated
• Reduced labor costs
With cabling eliminated, assembly time is greatly reduced
• Better quality & reliability
Fewer connections, less wiring
...More >>
JVL Industri Elektronik Integrated AC Servo Motors Save Costs  JVL, which is the European leader in the development of new servo and step motor technology, has developed a series of compact integrated motors, called the "MAC Motor".
The MAC 50 – 141 series and the MAC 400 – 750 series (without and with brake).
The MAC motor is an AC servo motor and controller combined in a single unit, offering previously unseen low pricing for the OEM market. Integrating electronics in a motor has been achieved previously, but never in such a compact unit with true AC servo performance. In the MAC motor, the servo motor, hall sensors, encoder and control circuitry have been especially designed by JVL to provide a self-contained, integrated unit in which the driver and controller are mounted behind the motor in a sealed housing.
System intelligence is thereby decentralized by off-loading control functions to the device level.
...More >>
Devicenet Expansion Module for JVL´s Integrated MAC Motors  JVL has developed a new module for the MAC50-141 and MAC800 series of integrated servo motors that enables the MAC motors to be used on Devicenet. The AC-servo motor, encoder, amplifier, positional controller and Devicenet are all built into the motor. The only connections required are a supply voltage and the Devicenet cables. The device type is a "Position controller", which is a standard method for controlling position when motion control is used on Devicenet. A double-supply facility is available so that position and parameters are maintained intact for example during an emergency stop. Via Devicenet it is possible to access all of the MAC motor’s registers. The Devicenet Module offers the following features: • Position, torque, and velocity control • 6 inputs and 2 outputs. 24V... ...More >> JVL Industri Elektronik Offers the PA0076 Multi-function Step Motor Driver  Improved step motor driver can replace Parker Compumotor driverFor years, many of JVL´s customers throughout the World have used a driver manufactured by Parker Compumotor, type SD12/13/14/15/15M, and have noted several points about these drivers that they would like to see improved. Since Parker has not further developed the series, JVL developed a driver that is compatible with the Parker driver, both functionally and in terms of connectors. The JVL Driver PA0076 does however offer improvements in many areas: High-efficiency MOS FET technology ensures less heat generation. Single power supply of 15-80VAC/DC ensures fewer cables and avoids double supply. Built-in potentiometers so that velocity and acceleration can be adjusted on the PCB. This gives lower cost price in extern... ...More >> JVL Industri Elektronik A/S Enters Agreement on Close Cooperation with Interroll  The world’s largest manufacturer of motorised roller drives is now ready with the first servo-motor controlled roller drive in the world.JVL Industri Elektronik and Interroll have announced that in cooperation they have developed a completely new servo-motor controlled roller drive based on JVL’s unique integrated MAC motor. The new development arose from Interroll customers’ increased requirements for roller drives that offered more precise and preferably dynamic control facilities. Interroll had met these requirements using frequency converters and, in many cases, through the use of new vector-based models, but many applications presented additional demands on other factors such as positioning, which required the use of an external encoder. Approximately 2 years ago, Interroll... ...More >> JVL INDUSTRI ELEKTRONIC Offers New Bigger MAC Motors  JVL's Integrated MAC servo motors are now up to 400 and 750W. Includes controller/driver, Hall sensor and encoder, all in one compact unit. Unique adaptation to any application with wide range of plug-in expansion modules.The MAC series of brushless servo motors with integrated electronics is a major step forward. All the necessary electronics in a servo system is integrated in the motor itself. A traditional motor system has in the past typically been based on a central controller unit placed away from the motor. This circumstance has the negative effect that the installation costs is a major part of the total expenses in building machinery. The basic idea in the MAC motors is to minimize these costs but also to make a component that is much better protected against electrica... ...More >> JVL INDUSTRI ELEKTRONIK has an Integrated AC Servo Motor with Power Rating up to 750W - Servo Motor with Built-in Driver/Controller with the Same Capacity as Traditional Servo Motors  JVL, which is the European leader in the development of new servo- and step motor technology, has again developed a new, unique product in the field of integrated motor control.JVL’s new additions to the fold comprise two complete, recently developed, high-capacity MAC Servo Motors with ratings of 400W and 750W. These new products were first revealed at the Danish Herning Tech trade fair this year. The MAC motor consists of a complete servo system, including a high-dynamic AC servo motor, hall-sensor, encoder, power supply, driver and positioning controller, as well as facilities for incorporating various modules such as Profibus, CAN, Nano PLC, etc. A new type of motor The MAC motor sets completely new standards for the performance and appearance of servo controls. With a length... ...More >> JVL Industri Elektronik's MAC Motor, The Complete Motion Solution - Brushless Servo Motor with Integrated Controller, All Necessary Components in One Unit  The MAC series of brushless servo motors with integrated electronics is a major step forward. All the necessary electronics in a servo system is integrated in the motor itself. A traditional motor system has in the past typically been based on a central controller unit placed away from the motor. This circumstance has the negative effect that the installation costs is a major part of the total expenses in building machinery. The basic idea in the MAC motors is to minimize these costs but also to make a component that is much better protected against electrical noise which can be a typical problem when using long cables between controller and motor. The servomotor, hallsensor, encoder and electronics are specially developed by JVL so that they together form a closed unit where the... ...More >> JVL INDUSTRI ELEKTRONIK A/S Offers New Servo- Step Motor Indexers for Precise Positioning and Speed Control of Both Servo Motors and Step Motors  The Indexer, Type SMI30, can be used with step- and servo motor drivers of any make which has a pulse and direction input. The Indexer performs the control of speed and positioning of the motor and is therefore a good alternative to PLC axis cards or a dedicated servo motor controller with built in indexer. SMI30 is programmable with PLC possibilities so that even advanced programs can be build-up and stored permanently in its internal EEPROM. There is the possibility of running the motor with different speeds in the same motor run, selecting acceleration, deceleration and distances, as well as interrupt and timer functions. 11 inputs, 8 outputs, 2 analogue inputs and 1 analogue output makes it possible to connect a wide variety of sensors, relays etc. Programming takes place ... ...More >> JVL INDUSTRI ELEKTRONIK A/S Offers a New 160V Step Motor Driver for Highly Dynamic Applications  JVL has developed a new driver that is physically similar to the popular SMD41 mini-step driver, but is intended for high-velocity, high-torque applications. The new SMD42 can be powered by a 160VDC supply (compared to 80VDC for the SMD41). This yields up to double the torque at velocities over 500RPM. Heat generation is kept to an absolute minimum through the use of the latest MOSFET technology.The SMD42/41 series is now available in 13 different models, with supply voltages from 15VDC to 160VDC, 3, 6 and 9 Amp models, full- half-, mini- and micro-step resolutions that can be changed by dipswitch, up to 25000 step/revolution, and more. The SMD42 is fully compatible with the SMD41 and can therefore be used directly in applications where the SMD41 has been used previously. Together... ...More >> JVL INDUSTRI ELEKTRONIK New Motor Control: The MAC Motor, Integrated AC Servo Motor well suited for Distributed Control Architectures  The MAC motor is an AC servo motor and controller combined in a single unit, offering previously unseen low pricing for the OEM market. Integrating electronics in a motor has been achieved previously, but never in such a compact unit with true AC servo performance. In the MAC motor, the servo motor, hall sensors, encoder and control circuitry have been especially designed by JVL to provide a self-contained, integrated unit in which the driver and controller are mounted behind the motor in a sealed housing.System intelligence is thereby decentralized by off-loading control functions to the device level. This makes the MAC motor well suited for distributed control architectures which are prevalent in factory automation processes today. The MAC motor is available in 3 models: 50, 95 or... ...More >> JVL INDUSTRI ELEKTRONIK A/S Offers the New SMC35 Programmable 1½ Axis Step Motor Controller  Step Motor Controller SMC35 offers new features for programming and controlThe SMC35 is JVL's new Step Motor Controller, with a built-in mikro-PLC, 11 inputs and 8 outputs. 2 analogue inputs and 1 analogue output. The Controller offers high torque, high velocity and high resolution in order to solve the most demanding applications in the industry. Programming is accomplished from a PC using JVL's Windows-based software MotoWare, which ensures quick and easy set-up, programming, and running in of a system. 2 built-in microprocessors ensure true multi-tasking with change of velocity, acceleration, outputs, etc., while the motor is running. The Controller additionally includes advanced timers, counters and interrupt facilities so that any task can be solved. An encoder input enables motor... ...More >> JVL INDUSTRI Elektronik A/S has a New IP67 Version Integrated AC Servo Motor  JVL Industri Elektronik A/S, a Danish company, announces an IP67 version of their Integrated AC Servo motor.This version of the motor is fully protected by a thick protective layer of chemical resistant epoxy and has stainless steel shaft, flange and hardware. It offers: • A thick protective layer of epoxy surface treatment bonded to the motor body • Double shaft seal and leak-proof cable entry • Resistance against rough chemicals • Cost-effective means of motion in harsh, wet environments • Ideal solution for the food processing, pharmaceutical and chemical industries • Bubble tight submersible operation The modular built-up of the JVL Integrated MAC motor also makes the IP67 version extremely versatile for many applications. Several di... ...More >> JVL INDUSTRI ELEKTRINIK A/S(a Danish company) has Two New Expansion Modules for Their Integrated AC Servo Motor - The Profibus-DP Module and The NanoPLC Module  The Profibus-DP module offers:• Control and setup through 12Mbit/s Profibus-DP • Logic I/O´s for high speed start/stop. In position indication and Home switch • LED´s to indicate status (D-Sub connector module only) • RS232/RS485 interface. The NanoPLC module offers: • Standalone operation with sequential program execution • 8/4 Opto isolated In/Out. 5-30VDC • Outputs up to 200 mA • LED´s to indicate output status, home and power status (D-Sub connector module only) • RS232/RS485 interface. Both modules can be delivered either with integrated cables with watertight connections for use in harsh environments, or be delivered with D-Sub connectors. The modular built-up of the JVL Integrated MAC motor makes it extremely v... ...More >> JVL INDUSTRI ELEKTRONIK A/S Develops a Mini Driver for Motor Mounting - The Smallest Step Motor Driver to Date  This specially designed Step Motor Driver can be directly mounted on the motor. The PA0073 was a customised solution for one of our customers.Measuring only 52.4 x 52.4 mm it can be directly mounted on the motor. It fits onto most types of high-torque motor, and can of course also be mounted on a surface. The PCB is equipped with an 8-pin connector; 4 terminals are used for the motor connection, 2 for the external power supply, and 2 are used to control the motor via step-pulse and direction signals. The Driver supplies 2.6A RMS in each phase, and current is automatically regulated to 0.8A when the motor is not receiving step pulses. The Driver controls the motor in half-step mode, which results in 400 steps/rev. The Driver can handle up to 20 ksteps/sec and a "half-step" curren... ...More >> JVL INDUSTRI ELEKTRONIK A/S has a New AC Servo Controller  Revolutionary "recipe-based" auto-tuning in AC Servo Controllers AMC20/21/22 from JVLJVL has invented and developed a completely new method for tuning motors. PID parameter tuning can now be a thing of the past. JVL's revolutionary "Auto-tuning" guides the user through a few questions and then performs an intelligent tuning of the loaded motor. JVL's Auto-tuning surpasses all other servo controllers on the market as it offers a new and more reliable way to perform motor tuning. With JVL's auto-tuning you need never adjust PID parameters again. The JVL AMC20 series of Servo Controllers perform auto-tuning using a 6th-order filter, as opposed to normal 1st-order (PID) or 2nd-order filters. An auto-tuning algorithm, such as that used in the Motor Controllers, must be able to prec... ...More >> |
|
|
|