|
|
Product ReleaseINFRANOR Now Offers AUTOMOTION INC ACS50 Intelligent Low Voltage Digital Servo Drives Print
 This new embedded high voltage, i.e. 264VAC; 400Vdc, drive utilizes DSP-based design architecture to provide selectable torque, velocity and position mode operation. This design utilizes flux vector control algorithm for higher dynamic response and improved noise immunity. Sine wave commutation from encoder feedback results in smooth torque at low speeds for demanding motion control applications. Most common applications are robotic, linear and direct drive requirements.Designed for use with DC, Brushless DC, or Brushless AC (vector control) servo motors, with both RS232 and 485 serial communications. This series of AC Smart drive was designed for optimum performance in a small package, as a value solution. The package measures just 4.1 in (104mm) by 2.5 in. (64mm). The ACS50 provides 6 Amps of peak current or .33Kw of power, with a DC input of 12 to 36 VDC. It is the right low-voltage brushless servo motor controller to meet your OEM design price/performance objectives. Contact Infranor to arrange a discussion of your technical and commercial application requirements through the link below.
For more information please contact us.
Washdown Products - IP67 Stainless Steel Brushless Washdown Motors
 Infranor's BF stainless steel Washdown Motor series is rated for IP67. The Infranor BF Series have smooth edges and stainless steel construction. The motors are round-frame AC brushless servomotors with high dynamic performance. The BF Series are available in six basic frame sizes providing 70mm to 142mm round design. Peak output torque range of the BF Series is from 67 in-lbs (7.6Nm) to 375 in-lbs (42.4Nm). The BF Series speeds range from 7,500 rpm to 10,000 rpm. ...More >>Servo Motor - Fluid Cooled Servo Motors
 Infranor USA Offers Fluid Cooled Servo Motors Infranor USA has announced the availability of fluid cooled motor designs in virtually all frame sizes of their radial magnetic flux type servo motors. The coolant flows is a helical pattern designed for optimal stator heat removal. Actual motor ratings are determined by external heat transfer, flow rate and coolant material. ...More >> Infranor USA Offers New AutoMotionPLUS™ Digital Servo Drive Software  Automotion, Inc. is pleased to announce the availability of our new AutoMotionPLUS™ Rev. 1.1 digital servo drive utility software program. The all-new AutoMotionPLUS™ digital servo drive program is a Windows® compatible set-up and tuning utility program developed specifically to support Automotion's growing family of all-digital brushless servo drives.
With understandable, easy to use graphical set-up menus and tables, including a full featured onboard oscilloscope function that lets you graph up to six unique drive system variables (out of 17 total to chose from), you see exactly how your servo system is responding in real time to your adjustments in external load and control loop parameters.
The graphing function has dual trigger set-up channels to allow you to set predetermined trigger delays on specific data tied to specific external servo loop events.
...More >>
Servo Actuator - Available by way of Infranor and Mavilor SA
 Infranor Inc. can provide a new Mavilor Servo Actuator with: Output Torque from 75 Nm to 1590 Nm 3 sizes: 110 – 200mm diameter x 150 – 230 mm Non-cogging brushless motor technology Low backlash with wide range of reduction IP65 rated with Class F insulation Request further information at www.info@infranorusa.com as well as manual downloads from http://www.mavilor.es Your application question may be forwarded through the link provided below. ... ...More >>Infranor USA Offers the New ACE200 Low Voltage Servo Drive - Ideal for Low Speed Motion Control Applications Requiring Smooth Torque  Infranor Inc. can provide this new embedded low voltage [up to 48VDC] digital drive from Automotion Inc. which utilizes DSP-based drive design architecture to provide software selectable torque, velocity and position mode operation. Sine wave commutation using encoder feedback provides smooth torque at low speeds for demanding motion control requirements, i.e. robotics, direct drive and linear motor applications. Power to 900 Watts in a smaller OEM package is available.... ...More >> Infranor Offers the New CD1-k Drive; CANopen  Infranor Inc. is now providing the new compact CD1 amplifiers for 230/400/480 VAC operation and up to 45 A(rms). It is the most flexible Infranor drive to date, with the following features:- Auto-phasing and Auto-tuning - All-digital speed and current loops with Space Vector Modulation technique - Selectable encoder output: 128 to 8192 ppr - Selectable speed range up to 25,000 rpm - Feedback; resolver and encoder (TTL or Sin/Cos signal, resolution value, incremental, absolute, single/multi-turn) - Communication; CANopen - Application configurable; max. speed, max. current, acceleration/deceleration, resolution, torque or speed mode. You may request further information through the link provided below.... ...More >> Hall Effect Sensor - Drive with Encoder / Sensor for Sinusoidal Brushless Motors
 Infranor USA has a Digital Speed Drive with Encoder Feedback / Hall Effect Sensors for Sinusoidal Brushless Motors Infranor Inc has introduced a new line of DIGITAL amplifiers providing speed / torque control AC/DC Brushless motors equipped with encoder feedback or with combination of encoder and Hall sensors devices. Suitable for either rotary or linear Brushless motors, the new SMTBD2 Series is available as a stand-alone single axis or for multi-axis configuration including the necessary power supplies. ...More >>Infranor USA Offers the New CD1-a, an All-Digital Drive  Infranor Inc. is now providing the new compact CD1 amplifiers for 230/400/480 VAC operation and up to 45 A(rms). It is the most flexible Infranor drive to date, with the following features: Auto-phasing and Auto-tuning All-digital speed and current loops with Space Vector Modulation technique Selectable encoder output: 128 to 8192 ppr Selectable speed range up to 25,000 rpm Feedback; resolver and encoder (TTL or Sin/Cos signal) Application configurable; max. speed, max. current, acceleration/deceleration, resolution, torque or speed mode. Contact Infranor USA for additional product details, pricing and application assistance.... ...More >> Medical Device Components - Mavilor Low Voltage Servo Motors Offered by Infranor  Applications include Pick-n-place, Robotic and Portable Medical Infranor Inc. announces the Mavilor BL brushless servo motor series available for low voltage, i.e. 48 Vdc, applications. The windings are rated for 3-phase sinusoidal or trapezoidal operation, with encoder or resolver feedback. A mechanical holding brake is also available. Peak output torque ranges from 0.76Nm (6.7 lb-in0 to 7.2Nm (63 lb-in) as high torque per frame size direct drive solutions. ...More >> Infranor USA has Rolivam Tacho Generators That Insure Reliable Transmission Of Output Signal For Applications Where Rapid Reversals Are Essential
 They have been designed to stop, position, accelerate or change direction without cogging and with fluctuations of less than 1.5% (pp).Electro-mechanic configuration with winding on 2 parallel branches, four brushes (2 on each line), a copper-silver alloy commutator with a great number of segments, good surface finish, rare-earth permanent magnets, very low inertia and high manufacturing quality. Mavilor Rolivam tacho generators and brakes are developed to the same high standards as our motors. Speed up to 9000 r.p.m. The above means that the ROLIVAM TACHO GENERATORS insure reliable transmission of the output signal and contributes to the ultrafast response in situations where rapid reversals are an essential element in the servo-drive system without cyclic variation. Infra... ...More >> Infranor USA Offers Newest ML and MLL Series of Slotless Brushless Servo Motors  Infranor Inc. announces the NEW Slotless ML & MLL Series servo motors. The brushless design provides zero cogging performance in a wide range of output peak torques from 3.2Nm [28 in-lb] to 123Nm [1085 in-lb.]. Additionally, the patented winding design ensures a 360 degree copper fill for very low torque ripple. This series is available in a round format (ML) and a square format (MLL) comes, with 400V windings for smaller drives and reduced heating. Output speeds to 25,000 rpm is standard with rapid acceleration.Custom designs, which includes kit style for in-process designs are available upon request.... ...More >> Pancake Motor - High Torque Brushless Pancake Servo Motor
 Infranor USA Inc Offers the New MSA Series High Torque Brushless Motor Infranor Inc. announces the NEW MSA Series pancake servo motors . The brushless design provides 20% more output than the standard MA pancake motors. They have one of the highest torque per weight/volume ratios in the servo motor industry. The flat geometry provides high dynamic acceleration with short electrical and mechanical time constants.
...More >>
INFRANOR Offers AUTOMOTION INC ACS100 Digital Drives  This new embedded high voltage, i.e. 264VAC; 400Vdc, drive utilizes DSP-based design architecture to provide selectable torque, velocity and position mode operation. This design utilizes flux vector control algorithm for higher dynamic response and improved noise immunity. Sine wave commutation from encoder feedback results in smooth torque at low speeds for demanding motion control applications. Most common applications are robotic, linear and direct drive requirements.Designed for use with DC, Brushless DC, or Brushless AC (vector control) servo motors, with both RS232 and 485 serial communications. This series of AC Smart drive was designed for optimum performance in a small package, as a value solution. The package measures 5.35 in (136mm) by 3.32 in. (84.5mm) by 1.0 in. (26mm). T... ...More >> INFRANOR USA Offers Mavilor High Acceleration Servo Motors  Infranor Inc. now can offer the BL Series AC Brushless servo motors for high acceleration rates with high top end torque. Through technical changes in design, Mavilor SA has designed servo motors with a 25% increase in torque/inertia for higher acceleration applications. Additionally, the high speed output torque is available with a 10% roll-off.Not only is the output torque one of the highest per motor volume, in the industry, but now with higher acceleration performance. The customer now has the choice of obtaining higher acceleration in a small package or increasing to the next size up for higher torque, at the same acceleration rate. This performance is available in the standard square format, with diameters of 70mm and 110mm. The BL Series AC Brushless servo motors are ideal fo... ...More >> Robotics - SMT-100 Series All Digital Drive with Analog Input
 For DC Brushed Motors in X-Y-Z Table, Pick and Place Machine, Robotics and Packaging Applications A new line of ALL DIGITAL servo amplifiers for DC Brushed Motors. The Series SMT-100/D digital servo modules are PWM servo amplifiers that provide speed or torque control for brushed DC motors. Encoder or BEMF feedback will control velocity, where the torque mode operation will control current as a transducer amplifier. ...More >> INFRANOR USA Offers the Mesa MSD Series of Amplifiers for Space Constrained Servo Motor Control  The Mesa MSD series amplifiers are designed for controlling servo motors in a compact package. As a universal type drive, it is used for brush or brushless trapezoidal or sinusoidal servo motors. Voltages are available from 24 Vdc up to 400 VAC, and switching frequencies to 20Khz, with peak currents from 8 Amps to 30 Amps. Feedback control is provided for resolver, encoder, dc tachometer or BEMF system devices. Many applications utilize encoder feedback to drive servo motors up to 30,000 for high speed positioning and regulation. All models have CE approval.Performance enhancements include high dynamic speed regulation, by utilizing encoder feedback with very low sample period and can enhance deviation loop. This solution is technically far better and more cost effective than a resolve... ...More >> INFRANOR USA Offers a Lower Power Tuned Servo Solution with Mavilor 48Vdc BLT Series Brushless Servo Motors and Automotion Inc. ACS Series Servo Drives  Infranor Motor/Drive SolutionAt 48Vdc, the operating torque range is 1.0 lb-in. (0.11Nm) to 3.4 lb-in. (0.48Nm) at 3000 rpm. The square motor design is available from 1.3 in. (30mm) to 2.2 in. (55mm) widths, with Halls and encoder feedback options. This tuned solution is ideally suited for cost effective point-to-point applications. All Automotion ACS drives are intelligent digital drives that provide selectable close-loop torque, velocity or position mode operation. The small drive package size provides a maximum of programmed motion configurations. Additional boards available include a re-gen pluggable board and an I/O break-out board for prototype designs. The smallest drive, ACS050, provides up to 225 watts of peak power from a maximum 36 Vdc bus in a 4.1 in. (104mm) by 2.5 in. ... ...More >> INFRANOR USA has the ACE1000 High Voltage Servo Drive  Infranor Inc. now offers the Automotion Inc. ACE1000 digital drive. This new embedded high voltage, i.e. 264VAC; 400Vdc, drive utilizes DSP-based design architecture to provide selectable torque, velocity and position mode operation. This design utilizes flux vector control algorithm for higher dynamic response and improved noise immunity. Sine wave commutation from encoder feedback results in smooth torque at low speeds for demanding motion control applications. Most common applications are robotic, linear and direct drive requirements.This series of AC Smart drive was designed for optimum performance in a small package, as a value solution. The package, which includes heat sink, measures 11.1 in (282mm) by 6.7 in. (170mm) by 4.7 in. (119mm). The model 20 provides 20Amp. of peak curr... ...More >> INFRANOR USA Offers a New 38mm Diameter Brush DC Servo Motor in the CML Series by Mavilor  The image provided is new 38mm diameter CML-30 servo motor.The standard CML-30 configuration is 41mm square but this unit was modified to fit a customer application where size was of critical importance. CML-30 Series features include: • Small dimensions • Radial magnetic flux • High performance • Square format An Infranor USA engineer is standing by to design a solution to your most challenging application question.... ...More >> INFRANOR USA INC Offers the New CML Series of Brush DC Servo Motors by Mavilor  Mavilor has completed a new design for table top centrifuges. The motor is a brush style CML series with smooth performance in a 38mm diameter housing and an integral 1024 ppr encoder. At the rated maximum speed the brush life is 10,000 hours.DC Servo motors - CML Series: • Small dimensions • Radial magnetic flux • High performance • Square format For more information, to ask an application question or to specifiy your project requirement, contact an Infranor engineer through the link provided below.... ...More >> INFRANOR USA INC Offers Several Series of DC Servo and AC Servo Motors, by Malivor  Infranor USA has the MSS, CML, MA, MSA and BL Series of Malivor DC Servo and AC Servo motors. A brief description of each Series follows.DC Servo Motors: MSS Series • Ratings to 6,000 RPM. • Compact Length. • Zero Cogging. • Acceleration Torques to 10 x Rated. CML Series • Small dimensions. • Radial magnetic flux. • High performances. • Square format. AC Servo Motors: MA Series • The short mechanical time constant makes it ideal for control operations. • An extremely short electrical constant provides high peak torque at high speed. • A high "theoretical" acceleration gives an extremely fast response time. • High stall torque due to the absence of commutator bars. • Low thermal resistance provides low working temperatures. • High power to weight ratio, ideal f... ...More >> INFRANOR USA Offers the IPS1000 a Intelligent Positioning Servo for OEM Applications  Closed-loop programmable Position, Velocity, or Torque mode control. It's as simple as filling in the blanks. The new intelligent IPS single axis digital servo controller makes brushless servo applications a snap. The intelligent positioning servo systems provide optimal cost, performance, and ease-of-use advantages to our OEM customers.Product Features & Benefits Automation's family of high performance brushless servo positioning drives offer Torque, Velocity, and Positioning capabilities - an all-in-one compact OEM package. The new IPS Intelligent positioning servo series is designed for a variety of OEM servo motion control applications. Electronic Gearing, CAM Following, Step Motor Emulation, Analog Input Velocity, Torque Control, and Stored Motion Sequencing are just a few of the... ...More >> INFRANOR USA Offers the New ISS Intelligent Sensorless Servo Controller - Optimal Performance, Cost and Ease of Use Advantages for OEM Customers Requiring Sensorless, Brushless DC Velocity Control  The ISS series is a new family of high performance sensorless, brushless DC Servo controllers,that is designed for sensorless closed-loop velocity control of a three phase brushless DC motor. Using the latest advancements in DSP processing capability this intelligent controller requires no feedback devices in the motor. Only a single power connection is required between motor and controller. Using a specially developed proprietary sensorless flux vector algorithm the controller can regulate motor speed to within +/- 0.1% (i.e. +/- 5 RPM out of 5000 RPM) with varying loads.This sensorless control capability developed exclusively for permanent brushless DC motors has several advantages over alternate AC variable frequency or AC flux vector solutions. Not only does the permanent magnet br... ...More >> INFRANOR USA Offers New ACE Digital High Voltage Servo-Amplifiers  The ACE1000 is the newest addition to Automotion's AC "Smart" series of all digital brushless servo-amplifiers designed to provide today's OEM with maximum brushless servo performance at the lowest possible cost. The ACE1000 series utilizes the latest in DSP-based drive design architecture to provide software selectable torque, velocity, and (optional) position mode operation.Sine wave commutation using encoder feedback provides smooth torque at low speeds for demanding motion control requirements found in robotic, direct drive, and linear motor applications. Optional software selectable trapezoidal mode allows lower cost motor commutation and velocity loop control from Hall effect feedback only motors. Available initially in 10/20 and 18/30 cont./peak amperage ratings with convenie... ...More >> INFRANOR USA INC Offers New eMotors, a High Temperature Pancake Servo Motor  Infranor Inc. can provide the eMotor solution for low voltage, i.e., 24VDC and 48VDC, and high power outputs up to 15Kw.The eMotor is a pancake design; 7 inch diameter, for smaller areas and enclosures. A variety of motor windings allows for currents from 10Amp to 100Amp operation, due to the higher thermal [200 degrees F] management designs. The modular design also provides a multi-stacking of the units to meet torque requirements. Request further product information and/or ask an application question through the convenient link below.... ...More >> INFRANOR USA INC's MSD1 Series Offers Servo High Dynamic Speed Regulation  Infranor Inc. announces a new high dynamic speed regulation to drive servo motors. Using encoder feedback with a very low sample period and can enhance deviation loop. This high dynamic speed regulation is available in the new MSD1 Series. This solution is technically far better and more cost effective than a resolver solution.Infranor's servo amplifiers are constructed to Eurocard format and in modular form that can be utilized in either multi-axis rack configurations or pluggable into self-contained power blocks having intergral power supply and braking regulator circuitry. Amplifiers are CE compliant and tested for conformance to IEC standards 801-2-3-444. Infranor is a supplier of servo motion control system solutions consisting of brushless servomotors, digital amplifiers, moti... ...More >> INFRANOR USA Offers the New MLL Series Brushless Servo Motor  Infranor Inc. announces the NEW MLL Series servo motors. The brushless design provides zero cogging performance in a wide range of output peak torques from 0.72Nm [6.0 in-lb] to 40Nm [350 in-lb.]. The square format comes with 200V and 400V windings. The long geometry provides high speed [10,000 rpm] dynamic response. Highest speeds at 30,000 rpm are well suited to medical equipment and robotic equipment designs.Custom designs are available upon request.... ...More >> INFRANOR USA INC Offers a New Centrifuge Solution  Infranor Inc. announces the NEW high speed ( 25,000 rpm) servo motors available in brush and brushless designs for centrifuge performance.Torque/Speed requirements are met with the coggless performance of the ML and MLL servo motors, as well as the small brush CML motors for table top designs. Matching Automotion servo drives are available from Infranor. Viewers are encouraged to request additional product information or ask related application questions.... ...More >> INFRANOR USA Offers New Low Voltage Brushless Servo Motors  Infranor Inc. announces the NEW BLS / BLT Series Low Voltage servo motors. These brushless motors are designed for use in 48 VDC systems and are available with 3-phase sinusoidal or trapezoidal windings and resolver or encoder feedback.A mechanical holding brake option is also available. They are available in peak output torques from 0.76Nm [6.7 in-lb] to 7.2Nm [63 in-lb], with housings 32 mm [1.25 in.] and 70mm [2.75 in.] square and 117.5 mm [4.6 in.] to 148mm [5.6 in.] lengths. Nominal speed is 3000 rpm.... ...More >> INFRANOR USA offers the BF Series Stainless Steel Washdown Motor  Infranor Inc. announces the NEW BF Series washdown servo motor. They were specifically designed for the most demanding food and chemical processing applications. The housing and shaft are stainless steel with smooth edges for a true IP67 design. The brushless designs come with 3-phase sinusoidal winding and a resolver feedback sensor. A mechanical brake is also an available option.The BF series are available in peak output torques from 7.6Nm [67 in-lb] to 42.4Nm [375 in-lb], with stainless steel housing of 85 mm [3.3 in.] and 125mm [4.9 in.] diameters and 134 mm [5.3 in.] to 256mm [10.0 in.] lengths. Request further information, to ask a specific application question, or to request a quote please contact us.... ...More >> INFRANOR USA Offers CAN Open Interface  Infranor Inc. announces the additional capability in the SMTBD and CD1 Servo Drives to interface with CAN Open for distributed multi-axis applications. It provides the servo drives with a variety of motion functions allowing a good synchronization between axes and is ideal where distributed control is required. Trio Motion Controllers are ideally suited to CAN Open solutions.Infranor offers custom motor modification and design solutions, electronic development and design solutions, and software solutions. Infranor maintains offices in Naugatuck, CT and Pittsburgh, PA.... ...More >> INFRANOR USA INC has the New BLS / BLT Series Low Voltage Brushless Servo Motors  Infranor Inc. announces the NEW BLS / BLT Series servo motors. The brushless design comes with 48 VDC 3-phase sinusoidal and trapezoidal windings and a resolver feedback, Hall & Encoder feedback.It is available in peak output torques from 0.76Nm [6.7 in-lb] to 7.2Nm [63 in-lb], with housings 32 mm [1.25 in.] and 70mm [2.75 in.] diameters and 117.5 mm [4.6 in.] to 148mm [5.6 in.] lengths. Nominal speed at 3000 rpm. A mechanical brake is also an available option.... ...More >> INFRANOR USA has a NEW BF Series Stainless Steel Washdown Motor  Infranor Inc. announces the NEW BF Series washdown servo motor. Specifically designed for the most demanding food and chemical processing applications. The housing and shaft are stainless steel with smooth edges for a truly IP67 design. The brushless design comes with a 3-phase sinusoidal winding and a resolver feedback sensor.It is available in peak output torques from 7.6Nm [67 in-lb] to 42.4Nm [375 in-lb], with housings 85 mm [3.3 in.] and 125mm [4.9 in.] diameters and 134 mm [5.3 in.] to 256mm [10.0 in.] lengths. A mechanical brake is available as an option. Infranor is a supplier of servo motion control system solutions consisting of brushless servomotors, digital amplifiers, motion controllers and sensors. Specific application questions are encouraged.... ...More >> Explosion Proof - Infranor EExdIIC Series Explosion Proof Motors  EExdIIC Series are axial air-gap servomotors housed in an enclosure into which gas can gain access. The gas can be ignited within the enclosure without the explosion damaging the enclosure or being transmitted to any flammable atmosphere external to the enclosure. The EExdIIC motors comply with the requirements for Apparatus Group IIC specified in EN 50 018(1977) + A1 to 3 and EN 50 014 (1977) + A1 to 5. The temperature classification is T5 referred to an ambient temperature of 70°C. ...More >> INFRANOR INC has a Line of All Digital Positioner Controllers with PROFIBUS-DP Capabilities for AC Sinusoidal Brushless Motors - FREE Application Evaluation for System Solution  The CD1-pm Series can operate as a stand alone positioner via I/O’s or with PROFIBUS-DP interface field bus communications which generatets the position trajectrory (S-curve) with up to 128 programmable sequences.The CD1-pm is available as a single-axis module including all supplies and mains filters. A 230VAC and 480VAC version are available bearing the CE and UL listing. The user-friendly parameter setting software Visual Drive Setup allows the display of all positioner parameters as well as their easy modification through either RS-232 or PROFIBUS. The very small dimensions of the CD1-pm positioner allow an optimum integration in 12” deep cabinets (connectors included). The CD1-pm positioner includes many features such as trapezoidal or S-curve trajectory, Jog Speed, Home r... ...More >> INFRANOR USA, INC's SMTBSICD Digital PWM Power Stage Amplifier is Compatible with Delta Tau PMAC2 for Brushless Motors - FREE Product Information / FREE Application Evaluation for System Solution  The SMTBSICD amplifier is 100% compatible with the DeltaTau PMAC2 Series for digital direct PWM control of the amplifier power stage. The SMTBSIC Series includes all necessary voltages and has a wide power range up to 140A peak current for a wide variety of applications.Suitable for multi-axis applications, the SMTBSICD Series if fitted inside a rack chassis with optional common mode inductor to eliminate EMF PWM disturbances. This Series of amplifier has a proven record in X-Y-Z tables combined with the PMAC2 where extremely fast acceleration /deceleration are required. For more information, please contact INFRANOR Inc by clicking on the link below.... ...More >> INFRANOR USA, INC has a New All Digital CANopen Amplifier for Sinusoidal Brushless AC Motors Offering FREE Product Information / Application Evaluation for System Solution  Infranor has introduced the CD1-k CANopen all digital amplifiers to control position/speed of AC sinusoidal Brushless motors, which can operate over the CANopen protocol (DS301 – Version 4.01)The CD1-k Series amplifier makes the interpolation between the position input commands provided by the host system as well as the synchronization between several axes. Available as a stand-alone single-axis that includes all supplies and mains filters, it is available in both 230VAC and 480VAC version and bear the CE and UL listing The user-friendly parameter setting software Visual Drive Setup, which is WINDOWS® compatible, allows the display of all amplifier parameters as well as their easy modification. Infranor has mastered the easy of operation thanks to the Infranor algorithm ... ...More >> INFRANOR USA, INC has a Low Cost All Digital Amplifier with Analog Input for Sinusoidal or Trapezoidal Brushless Motors - Offering FREE Product Information/Application Evaluation for System Solution  Infranor's MSD-MA Series amplifier, is an all-digital servo module to control speed or torque of Sinusoidal or Trapezoidal Brushless motors up to 3.3kW. This product is particularly suited for OEM application where easy commissioning is required without any servo system knowledge.The MSD-MA Series is a stand-alone single-axis block including all supplies and mains CE filters. A 230VAC or 440VAC version bears the CE and UL listing. User-friendly parameter setting software allows the display of all amplifier parameters as well as their easy modifications. An EEPROM saves all necessary parameters to the amplifiers and can be easily duplicated for high volume applications. Using either an incremental encoder or resolver feedback, the MSD-MA Series will control all Brushless MAV... ...More >> INFRANOR USA's CD1-a Series All Digital Speed Drive with Analog Input for Sinusoidal Brushless AC Motors  The CD1-a user-friendly parameter setting Visual Drive Setup s/w, which is WINDOWS® compatible, allows the display of all amplifier parameters as well as their easy modification. Infranor has mastered ease of operation thanks to the Infranor algorithm for automatic autotuning (servo knowledge not required), auto phasing function (when using unknown motor) and the automatic offset compensation scheme.The CD1-a Series all digital servo modules control speed regulation (or torque mode) in AC sinusoidal Brushless motors. The CD1-a system is a stand-alone single-axis block including all supplies and mains filters. Programmable encoder emulation signals, accel/decel ramp and digital oscilloscope are among many useful features to set the CD1-a amplifier. The very small dimensions of th... ...More >> INFRANOR USA, INC. has the CD1-K Compact Digital Servo Amplifier for Applications with Distributed Control  CD1-K: All digital compact servo amplifier with CAN Open protocol with a positioner program. Internal control of three servo loops: position, speed and current, as well as advanced servo loop filters: feed forward, anti-resonance, anti-wind-up and bandwidth adjustment.The CD1-K is a compact design in 230VAC and 400 to 480 VAC for direct line connected which UL recognized and CE certified. The CD1-K's CAN Open provides distributed control with increased reliability and material savings upon installation. Infranor USA Inc. is a group member of Infranor Inter AG, a public company listed on the Zurich stock exchange, a worldwide manufacturer and supplier of servomotors, servo amplifiers, and high performance servo systems. Infranor USA Inc. is located in Naugatuck, Connecticut. ... ...More >> INFRANOR USA has CYBELEC DNC 1200 Numeric Controls for Use in Unfavorable Conditions  The concept of this numerical control is that it integrates in the command desk the operator interface with external communication means (ie. disk readers, CD-ROM, 120MB Zip Drives etc...).Features: 3D color graphic display. 3.5" Floppy. CD-Rom Network (LAN) capabilities. 2- 14 axes Numerical Controls for conventional or synchronized press-brakes. An alpha-numerical "PC" keyboard or dust proof (IP65) are available options. The bending software PC 1200 for office PC’s will be able to run under Windows 95, 98 and NT. This "operating system" offers many advantages, especially for network connection, which becomes accessible for any operator. Windows 95â signify also a topical external gateway to the future. Another concept is the resolutely modern and light design. ... ...More >> INFRANOR USA has Mavilor® BLS/T Series Brushless Servo Motors
 The Mavilor BL series Brushless DC or AC Servo Motors offer an extremely short, square format design with impressive output torques, high torque to weight ratios and extremely fast acceleration capabilities. Sinusoidal and trapezoidal models offer compatibility with a wide range of sine and trap amplifiers. The BL series is especially well matched with Infranor's SMTBD digital servo amplifiers. (see servo amplifiers for detailed drive information)With peak torque of from 42 - 1750 in-lbs, reaching rated speeds of from 2,200 - 10,000 rpm, weighing from 3.3 - 45 lbs, motor lengths of 5.0" - 12.6" and diameters 2.8" - 5.6". Features: Linear Kt to 6x Rated Current Compact, Brushless Motor Design Available w/integral Resolver, Hall Devices, Encoders and Brakes High Power/Weight ... ...More >> INFRANOR USA has New Amplifiers offering application specific options  Infranor Inc. has announced a number of new, application-specific options for their digital servo amplifier family including Tension Control, Spindle Orient, Stepping Motor (Pulse & Direction) Emulation, Software Gearbox (Master-Slave), and Cogging Torque Compensation.The new, Windows-based SMTBD Digital servo amplifier includes such features as digital self-turning, programmable encoder resolution to 8192 lines, motor selection from an on-board motor library, current limits, digital oscilloscope, load simulation, and much more. Peak current ratings range from 5 Amps to 100 Amps. Single axis modules and multiple axis racks which can hold up to six axis in a 19" width are available and include the integral power supply. Racks are designed to minimize RFI and EMI. Infranor motors a... ...More >> |
|
|
|