Enter Email

Rotary Stage

Manual Positioning Stages

Manual Positioning Stages by OES
 
Manual positioning stages are the cost-effective solution when a simple yet precise motion control is needed. Optimal Engineering Systems (OES) offers a complete range of manual positioning hardware, including:

Tags: Linear Motion, X Y Positioning, Rotary Stage, Z Positioning

Compact Vertical Translation Stage Offers 0.05 µm Minimum Incremental Motion

Aerotech Compact Vertical Translation Stage offers 0.05 µm Minimum Incremental Motion

Aerotech’s MPS-SV series lift stages provide high-performance elevation motion in a compact, cost-effective design. These lift stages are engineered for applications ranging from laboratory research to high-reliability production processes and are offered in two sizes – the MPS50SV and MPS75SV.

Tags: Linear Stage, Rotary Stage

High Precision Rotary Stage

DT130-DC High Precision Rotary Stage by Steinmeyer Inc

Steinmeyer, Inc. offers a new addition to its line of precision rotary stages. The standard DT130-DC stage is a worm gear driven unit with a rotary encoder and features positional accuracy of +/- 0.07 degrees, repeatability of +/- 0.007 degrees, a max speed of 15 rpm and a load capacity of 50 Newton. Drive mechanism is a DC servo-motor.

Tags: Rotary Stage

AGR Series Rotary Stages Offer Enhanced Performance in a Robust, Economical Worm-Drive Package

AGR series motorized rotary stage from Aerotech

 

AGR series motorized rotary stages provide significant improvements in speed, load capacity and long-term positioning performance over previous generations of worm-gear-drive stages. They address a wide range of applications for general purpose positioning in laboratory and industrial uses, in a robust and economical package.

Tags: Rotary Stage

Compact Rotary Stage with Torque Motor Drive

DT240 Rotary Stage by Steinmeyer Inc

Steinmeyer, Inc. announced a new addition to its line of precision rotary stages. The DT240 stage is driven by a torque motor for high speed motion. With an overall height of 100 mm and width of 240 mm this stage is ideal for applications requiring space saving solutions. The DT240 has a repeatability of +/-0.0001 degrees, a max speed of 480 rpm and a continuous torque of 8 Nm.

Tags: Rotary Stage

T-RS Series Motorized Rotary Stages with Built-in Controllers

Zaber T-RS60 rotary stage

 

Zaber’s T-RS60 rotary stages provide precise, continuous 360° rotation in a compact package. The robust bearing design allows the stage to handle up to 20 kg (44 lb) of load. Two options for worm gear ratios provide resolutions of 0.00023° or 0.00092°.

Tags: Rotary Stage

Ezi-Actuator HB a Hollow Rotary Belt-Pulley Actuator Driven by Closed Loop Stepping Control System in one Package

Ezi-Actuator HB a Hollow Rotary Belt-Pulley Actuator Driven by Closed Loop Stepping Control System in one Package

HOLLOW ROTARY TABLE, ACCURATE TIMING BELT DRIVEN, ECONOMICAL, HIGH GIRIDITY, FASTRESPONSE

Introducing Ezi-Actuator HB, a high performance and Economical diffusion of Hollow Rotary Actuator is extremely low back lash timing belt is driven into the hollow rotary table combines to high speed, high accuracy of closed loop stepping control system, Ezi-SERVO.

Tags: Rotary Stage

MPS-GR Miniature, Gear-Drive Rotary Stages for Tight Spaces

MPS-GR Miniature, Gear-Drive Rotary Stages for Tight Spaces

Aerotech’s MPS-GR series rotary stages provide accurate, repeatable positioning in a miniature, low profile and economical package. Available in two sizes – the MPS50GR and MPS75GR - they are engineered for the confines and requirements of a laboratory or research and development setting. MPS-GR stages are ideal for optics, measurement, alignment, inspection and other similar applications.

Tags: Rotary Stage

Rotary Stage’s Integrated Collet Chucks, Direct-Drive and High Throughput Equal Lowest Cost of Ownership

Rotary Stage’s Integrated Collet Chucks, Direct-Drive and High Throughput Equal Lowest Cost of Ownership

Aerotech’s CCS series rotary stages (patent pending) with integrated captured collet chucks provide automated material handling capability for a wide range of materials and applications. Collet chucks used with the CCS family accept C-, D- or Levin-style collets that are readily available from machine-tool component suppliers in sizes supporting tube diameters from 0.1 mm to 27 mm. These collets provide outstanding run-out characteristics for applications requiring high-precision gripping of tubular material.

Tags: Rotary Stage

APR Series Direct-Drive Rotary Stages are Ideal for Rotary Testing, Pointing, Optical Calibration and Metrology

APR Series Direct-Drive Rotary Stages are Ideal for Rotary Testing, Pointing, Optical Calibration and Metrology

Aerotech’s APR series rotary stages employ precision-machined and ground stage parts coupled with high-precision angular contact bearings and an Aerotech direct-drive motor to produce exceptionally low error motions, accuracy errors, and repeatability errors. The addition of high-resolution optical encoders provides excellent pointing capability with low-jitter velocity tracking.

Applications
APR stages are ideal for rotary testing, pointing, optical calibration systems, and metrology systems in applications including single and multi-axis electro-optic sensor testing, resolver or optical encoder accuracy testing, missile seeker testing, antenna testing, inertial navigation device testing, photonic component alignment, high-accuracy laser machining, and precision wafer inspection.

Tags: Rotary Stage

Company Directory

Search by Company Name A-Z
A B C D E F G H I
J K L M N O P Q R
S T U V W X Y Z #