Brushed DC Motor
CANopen, Profibus, Modbus Enabled Solar Tracker Motors
 |
Based on 20 years experience in solar industry motion control with over 150,000 units in the field, Dunkermotor’s new line of brushless dc Solar Tracker Motors (STM) with integral fieldbus-enabled controllers are optimized to reduce development time, lower installation costs and provide lowest total cost of ownership (TCO) in a variety of solar tracking applications. Electric energy production can be increased by 30-35% with solar tracking compared to fixed photovoltaic panel systems. |
70 Watt Brushless DC Motor with gear and encoder options – Power Pack in a compact size
 |
maxon motor’s newly designed 70 Watts flat brushless motor delivers a max. continuous torque of 130 mNm at an efficiency of up to 85%. The new motor in its 45 mm diameter is available with Hall sensors and comes in four windings (24, 30, 36, 48 V). It can be combined with more than 54 different planetary and spur gearheads. For motion control purposes, maxon provides a wide variety of servo controllers and positioning controllers to select from. |
Go Green and Maximize Performance with Portescap’s New Athlonix™ Brush DC Motors
 |
Optimized coreless design delivers unparalleled power density and speed-to-torque performance in compact, energy efficient package Portescap introduces Athlonix™ high-power density brush DC motors. These compact, high-efficiency endurance motors deliver unrivaled speed-to-torque performance in a compact lighter weight package (15-53 grams depending on frame size) with output power up to 9 watts. |
Smaller, lighter package delivers higher continuous output power than comparably sized DC motors
 |
Portescap has expanded its family of brush DC motors by introducing 35GLT motors. These RoHS-compliant motors have a 35mm housing and weigh just 360 grams, while delivering a 40% increase in torque-to-volume ratio when compared with standard iron core motors of similar frame size. The maximum continuous torque approaches 150 mNm in the 35GLT, a 25% improvement over similar conventional models. They are available with five winding types in the voltage range of 24V to 90V, and are cost-effectively customizable for use with a range of gearboxes and encoders. |
A 40mm brushless motor with a formula for high power density
 |
Maxon’s new EC 40 is characterized by high quality materials and high performing specifications. The motor features a neodymium permanent magnet, stainless steel housing and welded flanges. It features a very flat speed/torque gradient (about 3.6 rpm/mNm), mechanical time constant 2.1 ms, permissible speed 18’000 rpm, and efficiency of 89%. The ironless winding offers extra quiet running and high stall torque. |
Lo-Cog Brush DC Gearmotors from Pittman
 |
PITTMAN Series GM8000 brush-commutated DC gearmotors from Servo2Go.com feature 11-slot skewed armatures to minimize magnetic cogging (or reluctance torque) and promote quiet and smooth operation. Series GM8000 gearmotors are available with a range of 11 standard reduction ratios from 6.3:1 to 187.7:1. Peak torques up to 175 oz-in can be achieved with wide-face gear options. Armatures are skewed to minimize magnetic cogging, even at low speeds, and windings are resin-impregnated for greater reliability in incremental motion applications. Two-pole permanent magnet stators are constructed of ceramic magnets enclosed in heavy-gauge steel return rings. Diamond-turned commutators ensure maximum brush life. |
Aircraft Maneuvering System Parvalux Application Story
 |
Moving light aircraft around presents a similar problem to that of caravans. For example, transferring a small bi-plane from a hangar onto a runway apron requires considerable physical effort and great care to ensure the wing tips and tail are not damaged. While there are petrol-driven maneuvering devices available these can be unreliable if they are only used occasionally or allowed to get damp. Reversing is difficult too and the operator needs to take great care with the clutch and gearbox to ensure smooth operation. |
Gearheads - Modular Spindle Drives GP 22 S and GP 32 S by Maxon
 |
Mechanical engineering often faces the task of converting rotational movements into powerful linear movements. The associated development costs can now be cut dramatically by using modular spindle drives in maxon motor’s modular system. The GP 22 S and GP 32 S gearheads, specifically adjusted for spindles, are designed to withstand high loads, and the special spindle intake means that customer-specific spindles can be assembled with ease in significantly less time. |
Servo Motor - Customizable DC Brushed Servo Motors
 |
Dynetic Systems’ Brushed Motor catalog features our premier line of brushed motors. We have been specializing in creating custom motors to fit your needs for over 30 years. We offer COTS motors, Sealed, MIL-STD, EMI/RFI and High/Low Temp features for many different industries for quick development. Our current catalog offers features to assist you in designing the type of motor that you need as well as illustrations of some of the customization we are capable of. |
Highlighted Companies
 |
BEI Kimco Magnetics 1499 Poinsettia Ave Suite 160 Vista, CA,92081 |
 |
H2W Technologies, Inc 26470 Ruether Avenue Santa Clarita, CA,91350 |
 |
Maxon Precision Motors 101 Waldron Road Fall River, MA,02720 |
 |
Portescap 110 Westtown Road West Chester, PA,19382 |
 | ||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
