Stepper Drive
DCM4826X Stepper Motor Drive System
 |
Haydon Kerk Motion Solutions, a global manufacturer of linear motion products, announces the release of the DCM4826X stepper motor drive module. The DCM4826X is a bipolar 2 phase chopper drive package rated for a 12-48VDC input voltage and a continuous output current rating of 2.6A rms (3.68A peak) per phase. The drive can be used with rotary stepper motors or stepper motor-based linear actuators and can be configured for full step, half step, or microstep (1/4, 1/8, 1/16, 1/32, 1/64 step size). |
ANG1 Ethernet/IP & Modbus TCP Integrated Stepper Motor Indexer + Drive
 |
Traditional motion controllers are difficult to integrate with PLC-based automation systems. There are so many manufacturers, so many different choices, and each solution contains proprietary features that complicate installation, programming, and compatibility. You’re also faced with mechanical challenges because these motion controllers often use non-standard mounting hardware. And their configuration involves learning another software program and/or language foreign to your controls environment. |
Modbus-TCP Stepper Indexer/Drivers Now Available
 |
Advanced Micro Controls Inc. (AMCI) has enhanced its industrial Ethernet stepper indexer/drives to include Modbus TCP connectivity. This additional protocol greatly extends the potential of AMCI’s SD31045E & SD17060E in PLC-controlled applications. The powerful (4.5 & 6.0 Amp RMS) AC line powered stepper motor controller/drivers eliminate the need for a plug-in card, and are easily configured through the host PLC software. AMCI’s E-drives offer system builders a choice of open or closed loop control modes, and come standard with a variety of features. |
PCM7539X IDEA™ Drive Stepper Motor Controller
 |
Haydon Kerk Motion Solutions has introduced the Haydon™ RoHS compliant PCM7539X IDEA™ programmable stepper motor drive capable of a 75VDC input voltage and a max output current of 3.85A RMS. This unit is designed to control the larger-size stepper motor linear actuators offered by Haydon Kerk and has the same functionality and programmability as the lower- power IDEA drives. |
MMD-17 low cost Stepper Motor Mountable Drive
 |
Advanced Micro Systems Inc (AMS), is proud to release the low cost Stepper Motor Mountable Drive, the MMD-17. The MMD-17 stepper motor driver is extremely budget friendly while maintaining the quality and reliability known with AMS products. Why spend twice as much on comparable products? The MMD-17 is an extremely compact, cost effective drive that can be mounted either on the back of a motor or on a small bracket. This drive accepts a STEP and Direction input that can be generated by most controllers and PLCs. It also can be pre-configured to work with up to 30V control input signals. This enables you to use it easily with most PLCs! |
ACS Stepper Drive/Controller delivers low-cost, easy-to-use electric actuator solutions
 |
Specifically designed to be used with electric actuators, the ACS Stepper Drive/Controller simplifies linear motion by automatically configuring all performance information about the actuator and motor. Hamel, MN – Getting electric actuators up and running has never been this easy, thanks to the new ACS Stepper Drive/Controller from Tolomatic. The new actuator control solution (ACS) is an easy-to-use, low-cost stepper drive and controller developed specifically for use with electric actuators.With built-in configurations for the ERD, Tolomatic’s low cost rod-style electric actuator, linear motion is quickly and easily created in the desired linear units(mm or inch). |
New STAC5 High Performance Stepper Motor Driver
 |
Greenville, DE- Servo2Go.com is pleased to introduce the STAC5 step motor driver from Applied Motion Products. The STAC5 provides up to 5 amps per phase from a high bus voltage with sophisticated current control, delivering high torque over a board range of speeds. An advanced anti-resonance algorithm with electronic damping allows for maximum torque utilization and fast settling times. The STAC5 is available in 120VAC and 220VAC versions, both housed in a compact package. |
Haydon Kerk Motion Solutions makes Stepper Drives available for 24 Hour Shipment
 |
Haydon Kerk Motion Solutions, Inc., a premier manufacturer of engineered linear motion products, announces the addition of stepper motor drivers available for 24 hour shipment. A variety of stepper drivers can be found online on the Haydon Kerk Engineering Development Center. |
AMCI UL Listed Stepper Drives Approved for OEMs and Machine Builders
 |
AMCI has expanded their selection of UL Listed stepper drives in response to increased safety and performance requirements for machine builders and OEMs. The SD17040, SD31045, and SD17060 series stepper drives are now certified by Underwriters Laboratories® (UL) as UL Listed products. The UL Listing mark on AMCI stepper drives indicates that the drives have been tested by UL to recognized safety standards. |
Ezi Servo Plus R Stepping Motor System from Fastech
 |
The Ezi-SERVO® Plus-R is an innovative closed loop stepping motor control system with an integrated Motion Control. The Ezi-SERVO® Plus-R utilizes a high resolution encoder to update the motor position every 25 micro-seconds. Using high performance DSP technology (digital signal processor) and software, the drive ensures exact position, no overshooting and smooth motion. The drive features: |
Highlighted Companies
 |
ACS Motion Control 6575 City West Parkway Eden Prairie, MN,55344 |
 |
Advanced Micro Controls, Inc. 20 Gear Drive Terryville, CT,06786 |
 |
Haydon Kerk Motion Solutions Inc 1500 Meriden Road Waterbury, CT,06705 |
 |
Tolomatic, Inc. 3800 County Road 116 Hamel, MN,55340 |
 | ||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
