|
Sensors ProductsCUI 5 mm Buzzers Ideal for Mobile Equipment Applications  CUI Inc announces a new addition to their buzzer product line with the CSS-05 series. Available in three configurations, the buzzers are extremely compact, housed in a 5 x 5 mm SMT package. Using magnetic technology, the series has a rated voltage of 3 V and a rated frequency of 4 K Hz. Sound pressure level options range from 75~78 dB with an operating temperature range of -30~70°C.
...More >>
iC MFL 8 channel fail safe FET driver with AEC Q100 qualification by iC Haus  iC-MFL is a monolithically integrated, 8-channel level shifter to drive Logic FETs. The internal circuit blocks have been designed in such a way that with single errors, such as open pins or the short-circuiting of two outputs, the iC-MFL output stages switch to a predefined, safe state. Externally connected FETs therefore shut down safely in the event of a single error. The device is now qualified for typical SIL/ASIL applications according to AEC Q100
...More >>
Stainless Steel Rotary Encoders Designed for the Most Extreme Conditions  AMCI's DuraCoder® brand encoders are now available with stainless steel housings and an IP69K rating for operation in the most extreme conditions. AMCI DuraCoders have a superior shaft load rating; providing a longer life cycle than other encoders. Many industrial applications require encoders that withstand a variety of harsh environments.With a standard IP67 rating, and IP69K rated versions available, end-users can take advantage of the DuraCoder's protection against ...More >> iC MZ Differential Hall Switch for Position Sensing  iC-MZ is an integrated device consisting of a differential Hall switch with back-end complementary line drivers. The two integrated Hall sensors are set 2 mm apart and sense the difference in magnetic field. Magnetic DC fields are not evaluated; this means that besides the direct scanning of magnetic pole wheels with an additional bias magnet ferromagnetic gear wheels can also be detected. The magnetic input frequencies range from DC to 40 kHz. Magnetic DC fields of up to 500 mT are tolerated.A magnetic difference in signal of 5 mT is sufficient to switch the ...More >> iC TW2 compact interpolator with integrated EEPROM from iC Haus  Chip incremental encoder for motor commutation and way or angle measurementThe new encoder device iC-TW2 is a highly integrated sine-to-digital converter which interpolates analog sine/cosine signals from magnetic and optical sensors with a freely selectable resolution of up to 8 Bit. Due to the complete integration of all functions, the interpolator does not need any other external components besides the sensor ...More >> Posital OPTOCODE Encoder Ethernet IP Interface
Precision Velocity Sensors Reduce Waste and Costs  INTACTON's COVIDIS velocity sensors provide highly accurate speed and length measurements for production of continuous goods like cable, non-woven's, paper, etc. Based on a unique high-precision, non-contacting optical imaging technology, COVIDIS sensors can measure the velocity of almost any material, regardless of surface texture. The measurable velocity range is
...More >>
Linear Position Sensors from POSITAL FRABA
For the measurement of linear movements or linear displacements, an absolute magnetic rotary encoder can be combined with a draw wire sensor. ...More >>iC MQ Encoder evaluation with x100 interpolation and diagnosis memory Sensor conditioning with 100-fold sine interpolation and line drivers  iC-MQ's universal signal conditioning facility is suitable for optical and magnetic linear and angle sensors. For the very first time, outstanding diagnostic features are now available. Operational errors, such as signal loss or clipping, exceeding a preset operating temperature range or RPM speed and - as a totally new feature - a line count error of the scale or disc pattern
...More >>
POSITAL Fraba offers Absolute Position Sensors
Micronor Remote Control Potentiometers Simplify Automation Upgrades  Micronor's new series Remote Control Potentiometers are turn-key solutions for upgrading manual potentiometer and rheostat process controls to PLC control. These products operate at 24VDC and following options: 4-20mA or 0-10V input/output control, non-isolated or isolated interfaces, and front panel or DIN rail mount. MR267 series replace low power (<5W) potentiometer controls. Watt options - prices range from $1295 (20W) to $2495 (300W). Typical lead time is 3-4 weeks ARO.
...More >>
POSITAL FRABA High Resolution CANopen Inclinometers
CANopen:
iC MSB Sine signal conditioner with a 1Vpp line driver  iC-MSB is a signal conditioner with a fault-tolerant line driver for sine/cosine sensors which are used to determine positions in linear and angular encoders, for example. Precision instrumentation amplifiers with differential current or voltage inputs are available for three channels and can be set independently with regard to amplification, offset and phase correction. An integrated controller supplies the sensor with power and ensures that the chip's output levels are stabilized to 1Vpp exactly. At the same time the finely adjustable calibration parameters permit an utmost degree of accuracy during the ensuing interpolation process.
...More >>
Certified SIL CL 3 Encoder with CANopen Safety Interface  The proven optical absolute encoders from POSITAL's OPTOCODE series are now also available as a safety version. The new addition to its product portfolio was developed in cooperation with the FRABA group sister company VITECTOR, which specializes in safety sensors. The new encoders fulfill the requirements of IEC 61508, EN 62061 and thus comply with the new Machinery Directive. Operated with protective extra low voltage (PELV), they are suitable for use in drive technology, lift applications, mobile machines, construction machinery and machine tools.
...More >>
Innovative Motion Sensors a Great Fit for Wind Turbines  FRABA’s OPTIPACT motion sensors measure velocity by calculating the rate at which an image of a moving surface travels across an optical sensor. With no contact between the sensor and the moving object, dust or surface contaminates won’t cause problems. OPTIPACT sensors provide an ideal way of determining rotor speed in wind turbines: just measure the velocity with which part of the rotor (e.g. nose cone or shaft) moves past a point on the body of the turbine.
...More >>
LD200 is the new Display joining the Lika POSICONTROL range The major innovation of LD200 universal display is the possibility to connect every kind of transducer.
Lika Electronic adds the SMEx Series of Linear Encoders to its family of Position Sensors  The SMEx series linear encoders provide rapid, accurate and repeatable position feedback with a small and strong design.The sensor head moves over the magnetic tape, without contact, and provides pulses proportional to its position. The SMEx linear encoders offer exceptional resistance to shock, vibration, and liquids ...More >> iC NQC has 13 bit real time interpolation now with BiSS C for uninterrupted absolute encoder measurement  For the first time ever high-resolution sine-to-digital converter iC-NQC provides the microelectronics industry with a BiSS C slave protocol that enables bidirectional data exchange at the same time as the cyclic output of measurement data. Normalized addresses device information is available that indexes the relevant standard device profile or a description file. An optional electronic ID plate can also be used to describe the measurement application.
...More >>
Extended Contact Bearing Motorized Goniometers by OptoSigma
Servo2Go DC Tachometer Generators Feature Low Ripple Servo2Go has just added a new high performance DC Tachometer Generator to its broad range of analog feedback devices.
Low-cost multi-purpose inclinometers from POSITAL  POSITAL has introduced ACCELENS (ACS), a new line of low-cost inclinometers that provide both analog and digital outputs. These versatile devices are available in a wide range of configurations designed to satisfy almost any requirements. Two-axis versions measure angular displacements of up to ±80º in both axes, while single axis models have a range of 0-360º and can be used as replacements for single-turn potentiometers or rotary encoders. Both versions are compact and easy to install. Unique factory calibration ensures accuracy and linearity of ±0.15º over their entire range.
...More >>
The limits are coming! New legislation will regulate the presence of hazardous substances in electrical equipment  The Environmental Design of Electrical Equipment (EDEEA) Act, currently before Congress, proposes stringent limits on the amount of hazardous materials that can be used in electroindustry products. The materials include lead, mercury, cadmium, hexavalent chromium and two flame retardants. This legislation will provide a uniform national standard for the United States and help ensure that equipment built to US standards will also comply with ‘Restriction on Hazardous Substance' (RoHS) standards for the European Union and China. This will help American manufacturers access these markets."For manufacturers of electrical equipment that will be covered by this new law, an important step will be to ensure that the components going into their products are fully compliant with the new standards" comments Christian Fell, General Manager of sensor supplier FRABA Inc. ...More >> LDT Sensors Get Interface Module for ControlLogix PLC  AMCI releases the only LDT interface module for Allen-Bradley’s ControlLogix PLC. Bringing Linear Displacement Transducer (LDT) position sensor data into the 1756 ControlLogix PLC is now easy and affordable. AMCI’s 2 channel 7252 LDT/MDT interface card can directly interface to two magnetostrictive sensors with PWM, control pulse, or start/stop signals. Features include latch inputs, onboard diagnostics, and ease of installation and programming. Utilizing Rockwell Automation licensed technology ensures the AMCI 7252 LDT interface module is 100% compatible with the 1756 ControlLogix PLC.
...More >>
Optical Path Control, Beam Steering & Image Stabilization with Lower Cost Piezo Controller Auburn, MA, Piezo system specialist PI has extended its E-616 multi-channel controller line for piezo based steering & stabilization mirror platforms. Four open and closed-loop models are now available in bench-top and OEM module versions. The closed-loop units contain two servo controllers, sensor circuit channels and 3 power amplifiers.
Piezo Steering Mirrors: Why? Piezo steering mirrors are faster than galvo mirror scanners and provide improved resolution and stability due to their high-stiffness, solid-state piezo drives. They are used to steer or stabilize beams or enhance image resolution. Applications range from optical commumication, astronomy and super-resolution microscopy to nano-lithography. ...More >>US Digital Introduces the T7 Absolute Inclinometer  US Digital is proud to introduce our latest innovation: the T7 absolute inclinometer. The T7 is an absolute inclinometer utilizing a unique solid-state sensor to give high accuracy tilt readings over a full 360 degree range. The T7 is available with either a RS232 or USD-CAN interface. The RS232 version supports up to fifteen T7s on a single cable. US Digital's CAN protocol allows a network of up to sixty-four T7s to be connected to a single host. Power for each T7 is supplied over the network cable. The host accesses the T7-CANs through US Digital's low cost CANA-232/CANA-485 adapter module. This module allows the host to access each T7 on the network using simple serial port commands. A Windows demo application is provided for displaying the angles and temperature as well as setting operating modes, orientation, zero position, damping / averaging time, direction, and more for every T7 on the network. Additionally, a Windows DLL gives the user a set of simple functions to read and write data to a network of T7s. ...More >> Compact Pressure Sensor SPAB  Festo is pleased to announce the addition of the Compact Pressure Sensor SPAB to our product offering. This inexpensive, compact pressure sensor is unique in its outstanding ease of operation and compact size. It's simple to set up, install, and commission. Ideal for use in medical and semiconductor applications. ...More >> Stainless Steel Resolvers Designed for Extreme Duty and Food Grade Applications  AMCI realizes the need for extreme-duty sensor feedback in harsh industrial environments, and in response, has developed a family of stainless steel resolver transducers. Options include 303 or 304 stainless steel housing and shaft, and a variety of mounting styles. The IP67 rated product line comes standard with either a 1/4", 3/8", or 5/8" stainless steel shaft and an oversized double row sealed bearing. The input shaft in each of these stainless steel resolvers extends through the internal core of the resolver rotor windings. This one-piece rotor design eliminates internal coupling components, increases shaft strength and maximizes reliability.
AMCI'S Resolver Sensors Enjoy Widespread Recognition from OEM Manufacturers  AMCI's expertise with resolver sensor technology has produced one of the most comprehensive collections of rotary position sensors and related interface products for the industrial controls market. With over twenty years of experience developing specialized resolver products, OEM Machine Builders and Control System Integrators are consulting AMCI as the authority on resolvers, resolver transducers, and resolver interface products. ...More >> Heavy Duty Shaft Increases Radial Load Rating by 250% for AMCI Encoders & Resolvers  Advanced Micro Controls Inc releases a heavy-duty shaft option for their DC25 DuraCoders and H25 resolver transducers. The rugged 5/8" (0.625") front shaft is made of stainless steel and increases radial load ratings by 250%. Applications that demand a high radial load rating benefit from the heavy-duty shaft's accurate position readings. ...More >> Rotary Encoder Combines Outstanding Durability With SSI Precision Feedback  AMCI's expertise with SSI interface technology and encoder sensors has produced an Absolute SSI DuraCoder, available in either single-turn or multi-turn configurations. With over twenty years of experience developing specialized industrial controls, AMCI supplies the world with over ten different SSI interface solutions, spanning seven different PLC platforms and four industrial networks....More >> AMCI Resolver Transducers Engineered As Direct Replacement For Expensive Competitors  Designed as a direct replacement for today's competing resolver transducers, AMCI releases their new HT/HTT-400 series resolver transducers in 4" diameter housing. AMCI's HT/HTT-400 series are also available with a wide selection of resolver types, suiting most electrical specifications. Short lead times come standard with this product. ...More >> Size 15 Magnetic Encoder Resists Shock, Vibration, and Cold  AMCI releases a heavy-duty size 15 magnetic encoder that resists shock, vibration, and cold temperatures. Available in either SSI or Analog output versions, AMCI's ME15 series encoders are designed for budget-minded applications that require superior reliability.AMCI (Advanced Micro Controls Inc.) has released a size 15 rotary shaft encoder capable of withstanding shock, vibration, and cold temperatures. Based on a magnetic design, AMCI's ME15 rotary shaft encoder is available in either SSI or Analog output versions. Designed for cost sensitive applications that require bullet-proof reliability, the ME15 magnetic encoder measures just less than 1.5" in diameter and is engineered for heavy-duty operation across a variety of industries ...More >> MicroE Systems Mercury 1500V for Motion Control in Vacuum Rated Semiconductor Processing Apps  MicroE Systems offers the MercuryTM 1500V (M1500V) digital output vacuum rated encoder for motion control applications. 2009 PI Nanopositioning Hard-Cover Catalog Released  Nanopositioning & Piezo Technology Specialist PI, has issued the 2009 hard-cover catalog entitled "Piezo Nano Positioning Inspirations 2009". The 530 page publication is the most comprehensive reference book on the fundamentals of nanopositioning, piezo systems and micropositioning technology yet. The new catalog contains 200+ product families--30% of them new -- with more than 1000 drawings, graphs, images and technical diagrams. New M8 Multi-Port Junction Blocks from Pepperl+Fuchs Take Up Less Control Panel Space than Similar Models  Pepperl+Fuchs introduces M8 Multi-Port Junction Blocks. These IP67 rated junction blocks feature 3-pin M8 connectors (v3 style) in 4-, 6- and 8-port models, all available for immediate shipment from stock. They reduce cabling expenses and simplify wiring by allowing multiple sensors to be wired to a single block with a single cable run back to a controller. They are smaller than typical M12 multi-port junction blocks, so they take up less control panel space. M8 multi-port junction blocks provide reliable 24VDC operation in temperatures ranging from -30° to 80°C.
...More >>
Displacement Laser by Optex Provides Ultra-High Accuracy Measurement Up To 2 Meter Range  The new Optex FA CD5 series laser displacement sensors provide the ultimate in non-contact measurement sensing for all types of surfaces from mirrored reflective silicone wafers to low-reflective black rubber. Optex FA's newly developed "Tri-CORE" technology with digital sub-pixel processing, high resolution electronic shutter and triple compensation/optimizing provides precise and stable measurement of any materials including glass and steel. Nine models of diffuse reflective sensing heads are available for sensing distances up to 2 meter. Standard diffuse types with both narrow and wide beam are available in 30mm and 85mm distances. Three long distance sensor heads featuring the wide beam spot are available in ranges of 350mm, 500mm and 2meter. ...More >>MICRONOR Introduces World’s First Universal MPG/Handwheel for Teach Pendants and Other Motion Control Applications  Micronor's MR190 Universal Manual Pulse Generator/Handwheel (MPG) is the world's first MPG to offer both A/A'/B/B' differential line driver and A/B pull-up quadrature outputs in a single unit. No longer does a CNC machine manufacturer, control panel fabricator, distributor or service center need to stock 3 or more handwheel models because of the non-standardized interface requirements of different manufacturers and models of CNC systems, PLCs and teach pendants. An MPG is a common accessory found on CNC machine tools. It is a manually controlled rotary handwheel that the machine operator uses to move a tool incrementally along an axis. The MR190 provides 100 detent positions per revolution and outputs one A/B quadrature pulse cycle per detent or "click". The quadrature outputs tell the machine both the number of incremental steps to move and direction. The MR190's intuitive operation, tactile feedback and ease of interface is ideal for use in all types of teach pendants, control panels, motor drives, position control systems and electronic instrumentation. ...More >>Sensitron's MIL-STD-1275 High Pulse Power Surge Protector is Protected at 100V Surge Sensitron's MIL-STD-1275 High Pulse Power Surge Protector is protected at 100V surge
BEI’s SwiftComm Wireless Interface Named as Golden Mousetrap Finalist  SwiftComm wireless sensor interface from BEI Industrial Encoders was named as a finalist in the Design News Golden Mousetrap awards in the category of Feedback Devices for Motion Control/Automation. ...More >> Tools for Microscopy & Imaging Catalog Precision Piezo Scanning Stages, Fast Nano Focus Drives & High Resolution Actuators  Nanopositioning specialist PI has released a new catalog entitled "Tools for Microscopy & Imaging", available for download in PDF format. The catalog focuses on high resolution, high speed specimen positioning devices (e.g. for microscope slides, well plates, etc.) and microscope lenses. In addition, compact tip/tilt mirror scanners and ultra-low-profile planar scanners for applications such as image stabilization, sub-pixel stepping and CCD sensor resolution enhancement are also featured. ...More >> BEI Launches Sensor Accessories E-Commerce Web Site  BEI Industrial Encoders is pleased to announce the launch of bei-industrial-products, a new e-commerce web site dedicated to industrial sensor accessories & support products. 
...More >>
Sensitron has a 3-Phase Brushless DC Motor Control with an EMI Filter  Sensitron offers a 3-Phase Brushless DC Motor Control with an EMI Filter, a complete motor control solution to your system needs!Sensitron serves the complete spectrum of reliability markets including space, civil & military aircraft, missile control & weapon systems & medical devices. ...More >> Micronor Fiber Optic Rotary Encoder for Extreme Electromagnetic Environments  Micronor's new TD5207 non-metallic fiber optic rotary encoder is designed specifically for motion control systems operating in extreme electromagnetic fields. ...More >> Koyo World Encoders Offers the Largest Selection of Optical Encoders  Koyo has rotary incremental shaft size 15, 20, & 25 hollow, modular/kit, qube 2.25" & wheeled designs. Linear encoder-fully enclosed, modular & linear strips. The Right Encoders! Quality Products, Super-Low Prices, Best Service & Immediate Delivery. Incredible Features and Super-Low Prices! ...More >> V-Infinity Offers a New Line of 0.25W SMT DC-DC Converters  V-Infinity, a division of CUI Inc, is now promoting a line of 0.25 W dc-dc converters. The VAT0.25 and VBT0.25 series feature a SMT package and internal SMD construction. ...More >>US Digital's X3Q Dual-axis Absolute Inclinometer  The X3Q utilizes MEMS(micro electro-mechanical systems) technology to sense tilt angles over the entire 360° range. Each axis appears as a virtual incremental encoder and reports the incremental and absolute tilt angle via 3-channel quadrature outputs. Any resolution may be specified between 4 and 36000 positions per 360 degrees (1 to 9000 CPR). Positions are reported 560 times per second. Each sensor is factory calibrated to provide absolute angular accuracy of ±0.20 degrees at 25°C. ...More >>Koyo Encoder Offers its PHD/Pendant Series Hand-held Pulse Generator  The PHD / Penant is specifically designed for applications using CNC Panels Features include:
Sensors - CUI Inc Increases Their Current Sensor Line  CUI Inc has expanded their line of current sensors to now include open loop, closed loop, high frequency, single power, and switch types. The newly extended line addresses a wide variety of commercial and industrial applications and uses. CUI carries twelve different series of open loop current sensors. There are several different mounting styles including bus bar insertion, bolt-on, and PCB which are housed in a variety of casing styles. There are two different lines of closed loop current sensors. ...More >>Resolvers - Aries Drive with Resolver Feedback  Parker Releases Aries Drive with Resolver Feedback Parker Automation announces the release of a resolver feedback option in its successful Aries family of low-cost, all-digital servo drives. The addition of resolver feedback increases the versatility of the Aries drive platform. Now users can choose the versatile Aries drive for use with resolver feedback in addition to smart encoders, quadrature encoders and Heidenhain EnDat absolute encoders. ...More >>Resolvers - Synchro & Resolver Conversion Products  Data Device Corporation Offers Synchro & Resolver Conversion Products DDC is the world's leading supplier of synchro & resolver conversion products for position feedback and a major supplier of synchro and resolver products. Military and industrial applications range from radar, IR and navigation systems, fire control to flight instrumentation/simulators, motor drives ...More >>Hall Effect Sensor - Three Hall Sensors Detect Rotor Position by Evaluating Its Magnetic Field  MicroMo Electronics' 44mm Is Its Most Power and Efficient Series of Miniature Drive Systems Ever With over 200 watts output, these brushless DC Servomotors from FAULHABER, are true prime movers considering their relatively small size of just 44mm diameter and 90mm length. This is made possible by combining a skew wound ironless rotor coil (system FAULHABER) with a very powerful Neodymium magnet. Thanks to their brushless commutation, the small motors have a very long useful life. ...More >>Resolvers - Complete Synchro / Resolver-to-Digital Solution  DDC's SB-36410IX PMC Card Offers a Complete Synchro/Resolver-to-Digital Solution Data Device Corporation (DDC) offers the SB-36410IX, a complete, programmable Synchro/Resolver-to-Digital PMC solutionfor VME /cPCI control and encoder-based systems. The card provides either 4 or 8 channels of fully independent Synchro/Resolver-to-Digital conversion and offers a host of programmable features, including resolution, input and bandwidth, to facilitate cost-efficient design-in time and advanced customizability. ...More >>Hall Effect Sensor - CUI's SCD Series Current Sensors  CUI Inc's SCD Series Current Sensors are Suited for Miniature Applications CUI Inc offers a new series of low profile current sensors which are among the smallest devices of their type on the market. The SCD series employs an open-loop, Hall effect configuration which allows sensing of AC and DC currents. Suited for a number of applications including over-current alarm or shut-down, power efficiency and control, inverters, and current commutation, the unit measures only 12 x 16 x 16 mm. ...More >>Micronor Offers New MR267 Motorized Potentiometers with 4-20mA Current Loop Control  This new Micronor product provides a simple and inexpensive solution for automating existing systems controlled by manually-operated potentiometers, rheostats or rotary cam switches. Motor Pots may not seem like a sexy control product but they fulfill a wonderful niche in process control! They are simple to use and easy to set up. No computers required or software to write. Easy to maintain and never obsolete. The user-specified potentiometers provide absolute positional feedback information or function as a variable resistor in an analog control or bridge circuit. The motor pot provides a smooth uniform ramp throughout its timing cycle. Rotary limit switches are programmed (via cams) to electrically control events (or provide status) at pre-stages. A few common applications include ramping up the field current of a DC motor or controlling the start-up of a generator.
...More >>
Cognex Offers a Stainless Steel In-Sight Vision Sensor  Cognex Corporation, the world's leading supplier of machine vision systems and vision sensors, announced at the PackExpo show in Las Vegas, the In-Sight® 5400S, a stainless steel vision sensor suitable for the toughest environments. The In-Sight 5400S is an industrial-grade vision sensor that meets IEC specifications for shock and vibration, and achieves an IP68/NEMA 6P rating that stands up to chemical wash down and submersion. "The In-Sight 5400S provides protection from harsh manufacturing environments without the added cost and complexity of an accessory enclosure," said Kris Nelson, Cognex Senior VP, Vision Sensors. "The powerful combination of performance and ruggedness makes the 5400S ideal for food, beverage, cosmetic, and pharmaceutical applications". The In-Sight 5400S can be used to sort objects, detect proper fill levels, inspect labels, caps and safety seals, verify label text, date and lot codes, read linear and 2D codes, and count and verify products in cartons.
...More >>
Hall Effect Sensor - Drive with Encoder / Sensor for Sinusoidal Brushless Motors  Infranor USA has a Digital Speed Drive with Encoder Feedback / Hall Effect Sensors for Sinusoidal Brushless Motors Infranor Inc has introduced a new line of DIGITAL amplifiers providing speed / torque control AC/DC Brushless motors equipped with encoder feedback or with combination of encoder and Hall sensors devices. Suitable for either rotary or linear Brushless motors, the new SMTBD2 Series is available as a stand-alone single axis or for multi-axis configuration including the necessary power supplies. ...More >> |
ABSOLUTE POSITION SENSORS
Absolute Encoders with Draw Wire
Encoders with DeviceNet Interface:
POSITAL - ANGUSENS Inclinometer with CANopen
LD200 can be connected to:
OptoSigma Corporation's 40mm extended contact bearing motorized goniometer features:
Manufactured by Servo-Tek Products Company Inc., the CS-7514F-51C tachometer features:
Features and Advantages of the 
Sensitron Part Number: SEN-5282
