Home Products     Jobs     News     DC Motor     Stepper Motor     Motion Controller     Servo Motor Advertise     Post A Job    
motion control

Ethernet Products


DMC 41x3 Econo Motion Controller with Ethernet by Galil
DMC-41x3 Econo Ethernet Motion Controller by GalilGalil Motion Control, an industry pioneer in motion control technology, has recently introduced the DMC-41x3 motion controller series. The DMC-41x3 is the latest product in Galil's Econo series which are high performance controllers at a lower price. The new product offers many enhancements compared to the prior Econo controllers including Ethernet 100Base-T, a USB 2.0 port, higher speed performance, larger program memory, analog inputs, and optically isolated I/O.

The DMC-41x3 operates stand-alone or interfaces to a PC with Ethernet 10/100Base-T or USB ...More >>

Galil Motion Control Galil Motion Control
270 Technology Way
Rocklin CA 95765 US
Phone: 916-626-0101
Website: www.galilmc.com


Galil Motion Control 2010 2011 Motion Control Product Catalog
Free Product Catalog from Galil Motion Control

Galil's 2010/2011 catalog provides specifications and pricing for its full line of controllers and drives including the Accelera ultra high-speed motion controllers, Econo low-cost controllers and the RIO Pocket PLC series ...More >>

Galil Motion Control Galil Motion Control
270 Technology Way
Rocklin CA 95765 US
Phone: 916-626-0101
Website: www.galilmc.com


Compact FRABA encoders with all the best connections
OPTOCODE Compact Encoders by FRABA
POSITAL's OPTOCODE encoders with interfaces for EtherNet/IP and PROFINET IRT networks are ideal for sophisticated motion control such as packaging lines, cartoning machines or anywhere else accuracy, precision and reliability are needed. Both encoder types can be used in high-speed machines: the EtherNet/IP models, which incorporate an Ertec200 controller, have cycle times of less than 10 ms, while the PROFINET IRT models support cycle times as low as 1 ms (isochronos real-time) and 10 ms (real-time) ...More >>

FRABA Inc. FRABA Inc.
1800 East State St - Ste 148
Hamilton NJ 08609 US
Phone: 609-750-8704
Website: www.posital.com


Absolute Real Time Ethernet POWERLINK Encoders by POSITAL Fraba

Ethernet POWERLINK Encoder by POSITAL FrabaReal-Time Interface
Ethernet POWERLINK is an open and completely software based solution that is promoted by the EPSG (Ethernet POWERLINK Standardization Group).
It is a real-time protocol that is based on the CANopen back bone.

The encoders from FRABA POSITAL have a jitter for synchronization that is less than 1 micro seconds

...More >>

FRABA Inc. FRABA Inc.
1800 East State St - Ste 148
Hamilton NJ 08609 US
Phone: 609-750-8704
Website: www.posital.com


Baldor Servo Drives are compatible with multiple Ethernet standards
e100 Ethernet compatible Servo Drive by Baldor

Baldor Electric Company is announcing even greater flexibility for one of the most versatile servomotor drive ranges in the world. The e100 drive family has been re-engineered to become compatible with no less than three industrial Ethernet standards - EtherNet/IP, Modbus TCP and Powerlink - as well as standard TCP/IP networks and Baldor's own highly popular Mint system building environment. ...More >>

Baldor Electric Company Baldor Electric Company
5711 RS Boreham Jr - POB 2400
Fort Smith AR 72901 US
Phone: 479-646-4711
Website: www.baldor.com


EtherNet IP Absolute Multi turn Encoder by AMCI
NR25 Ethernet Absolute Encoder by AMCIAdvanced Micro Controls Inc. (AMCI), has released the NR25 series of heavy-duty EtherNet/IP DuraCoder® encoders. These networked rotary sensors provide an overall measuring range of 16 bits (single-turn resolution) plus 14 bits (number of revolutions), or 30 bits total. With both single-turn and multi-turn versions available, AMCI's EtherNet/IP encoders are ready for any application. Designed in accordance with ODVA guidelines, the AMCI NR25 EtherNet/IP encoders are 100% compatible with ...More >>

Advanced Micro Controls, Inc. Advanced Micro Controls, Inc.
20 Gear Drive
Plymouth Industrial Park
Terryville CT 06786 US
Phone: 860-585-1254
Website: www.amci.com


Smart Ethernet drives add new flexibility to advanced motion control system building
MicroFlex e 100 MotiFlex e100 Baldor Ethernet DrivesToday, Baldor Electric Company launches a new generation of smart drives. Offering economic and space-saving solutions for many common single-axis automation requirements, the drives also feature an Ethernet interface compatible with the deterministic Ethernet-compatible motion control standard, Powerlink.

The new programming capability - Mint Lite - is now being fitted without charge on all of Baldor's MicroFlex e100 and MotiFlex e100 single- and three-phase drive ranges. These drives are available in a broad choice of power ratings up to 33.5 A - with higher ratings coming soon. The versatile drives may be used to control rotary and linear servo motors, linear motors, closed-loop vector motors, and in V/Hz control modes.

...More >>

Baldor Electric Company Baldor Electric Company
5711 RS Boreham Jr - POB 2400
Fort Smith AR 72901 US
Phone: 479-646-4711
Website: www.baldor.com


Wittenstein's Ternary Actuator Provides Linear and Rotary Motion Solutions
The Ternary has been known as the Intelligent Integrated Actuator for nearly a decade. Since this revolutionary product came into the industrial world, it has developed beyond simply a standard actuator. The new options that the Ternary now offers allow customers to mix-and-match their requirements to choose the product the application needs.

New control interfaces: Ethernet/IP and Analog Position Control

...More >>

WITTENSTEIN formerly alpha gear drives WITTENSTEIN formerly alpha gear drives
1249 Humbracht Circle
Bartlett IL 60103 US
Phone: 630-540-5300
Website: www.wittenstein-us.com


Innovative ball joint seal testing machine uses Ethernet TCP/IP controlled servos
Ethernet TCP/IP Controlled Servo Motors by Baldor

Developed by a leading builder of structural and custom test equipment, Dynamic Testing & Equipment (DTE), the new machine fully automates the accelerated life testing of the flexible boot seals used to protect ball joints in automobile steering assemblies. The use of programmable AC servos - instead of conventional hydraulic actuators - provides an unprecedented level of control flexibility, enabling test parameters such as joint articulation angles to be varied on the fly.

Capable of testing up to six boot seals simultaneously, testing regimes can include continuous articulation of the ball joints, hot and cold brine sprays, elevated humidity levels and air temperature cycling from -25 to +80 degrees Celsius.

DTE's boot seal testing machine employs two motorized movement axes - one vertical and one horizontal - each driven by a Baldor MotiFlex e100 3-phase servo drive and servomotor fitted with a multi-turn absolute encoder. The precise feedback signals enable both axes to be programmed to absolute zero, facilitating optimal positioning of the machine's tooling for parts loading and unloading, and ensuring ease of start-up.

...More >>

Baldor Electric Company Baldor Electric Company
5711 RS Boreham Jr - POB 2400
Fort Smith AR 72901 US
Phone: 479-646-4711
Website: www.baldor.com


Trio Announces Ethernet Analysis Tool to Help Diagnose and Identify Connection Issues
Ethernet Connection Tool by Trio MotionTrio's Ethernet connection tool helps user in fault finding of an Ethernet connection
and to assist management of a number of controllers on a network. The Visual BASIC code is available free from Trio.
The idea behind the Ethernet connection tool is to help analyze Ethernet connection issues and to assist management of a number of controllers on a network. You can check for free IP Addresses and fault find a connection to a singular address or look at a range as detailed below.
This application is based on the technical details in Trio's Application Note AN-211, available at www.triomotion.com. The Ethernet Tool source code is available (in Visual Basic) so that you can incorporate the tool into your application or modify it to your own network settings.
You will need to have the Trio PCMotion ActiveX installed to use the application as well as Microsoft .net 3.5 or later.
Ethernet connections have common parts which are the same for any Ethernet Node. The IP address for example is allocated to an Ethernet Node and any communications traffic for that node must use the IP address in order to access it. ...More >>

Trio  Motion  Technology Trio Motion Technology
1000 Gamma Drive
Suite 206
Pittsburgh PA 15238 US
Phone: 412-968-9744
Website: www.triomotion.com


Ethernet IP Stepper Indexer/Driver Designed For Allen-Bradley PLCs
AMCI Ethernet Stepper Indexer DriverAMCI releases a powerful 6.0 Amp RMS line powered stepper motor controller/driver that connects to Allen-Bradley's popular Ethernet IP industrial network. This integrated stepper indexer/driver saves money and simplifies installation by eliminating the need for a separate controller in the PLC. Microstepping, programmable current output, and anti-resonance circuitry are all standard features. Adding stepper axes is very easy; users simply attach another SD17060E to their Ethernet IP network. "The SD17060E stepper indexer/driver for Ethernet IP is an extension of AMCI's product alignment with Allen-Bradley PLCs. ...More >>

Advanced Micro Controls, Inc. Advanced Micro Controls, Inc.
20 Gear Drive
Plymouth Industrial Park
Terryville CT 06786 US
Phone: 860-585-1254
Website: www.amci.com


Galil Motion Controllers Used in Waterjet Machines from CNC Machines International
Motion Controller by Galil

When water is concentrated into a high-pressure stream shot from a waterjet at 60,000 psi, it can cut and shape a wide array of materials like cloth, foam, glass, plastic, and rubber as fast as 100 ft. per minute. Water can even cut through harder materials like wood, granite, stone, aluminum and steel.

One application of waterjet cutters is to cut designs into artificial turf and carpets. CNC Machines International (CNCMI) VLF series is a high performance waterjet cutter that can precisely cut and inlay intricate logos into carpet and turf.

...More >>

Galil Motion Control Galil Motion Control
270 Technology Way
Rocklin CA 95765 US
Phone: 916-626-0101
Website: www.galilmc.com


High speed carpet sample machine uses Powerlink industrial Ethernet for real-time multi-axis motion control
Powerlink industrial Ethernet by Baldor

Modra Technology, the specialist manufacturer of carpet sample machines, has chosen to base the motion control system for its innovative Mtuft range of machines on Powerlink technology from Baldor Electric Company (NYSE: BEZ). By using this deterministic networking technology for real-time multi-axis synchronization, Mtuft machines set a new industry standard for speed, accuracy and flexibility. They can produce a new tufted carpet sample in just 20 minutes, including setup time - a task which takes at least a day on conventional carpet sample machines or on production machines.

Modra Technology is a world leader in the design, manufacture and supply of carpet sample machines. Founded in 1991, the company initially produced error-detecting sensors for increasing the efficiency of Axminster looms. During the course of this work it identified the need for product development machines for carpet designers and manufacturers. At that time, carpet samples were either produced by hand - a very slow process - or by using volume production machines, which was expensive and disruptive.

...More >>

Baldor Electric Company Baldor Electric Company
5711 RS Boreham Jr - POB 2400
Fort Smith AR 72901 US
Phone: 479-646-4711
Website: www.baldor.com


Plug-in machine controller makes switching to Ethernet-based drives almost irresistible for machine builders
Ethernet-compatible Powerlink Drives by Baldor
Baldor Electric Company has launched a new plug-in motion/machine control module for its Ethernet-compatible Powerlink drives. The new controller module allows machine builders to eliminate the need for a separate external network controller, along with all of the cabling and panel space that would normally be required. As switching to real-time and deterministic Ethernet-compatible motion control is already proving extremely popular for machinery builders, the additional cost savings offered by this new approach make adoption of the technology almost irresistible.

The new Mint Machine Module plugs into a hardware expansion slot in any of Baldor's MotiFlex range of Powerlink-compatible three-phase AC motor drives. Two variations of the card are offered: a dual-axis version that will control the host Powerlink drive plus another external drive via a conventional analog interface, or a high-speed version that will also act as a Powerlink network controller to manage a complete multi-axis control system. Both options are compatible with Baldor's powerful Mint motion language, with its rich development support.

...More >>

Baldor Electric Company Baldor Electric Company
5711 RS Boreham Jr - POB 2400
Fort Smith AR 72901 US
Phone: 479-646-4711
Website: www.baldor.com


Powerlink Motion Control Network provides Simple System-building Platform for Unique Winding Machine
Powerlink compatible Controller & Drives by Baldorproduces carbon fiber tubes and rods for advanced applications including racing yacht rigging, aerospace structures..

The Ethernet-compatible Powerlink motion control network is helping the Swiss company Carbo-Link to create carbon fiber components for challenging applications such as rigging for racing yachts.
 

The company has used Powerlink compatible controller and drives from Baldor Electric Company to build a machine that winds carbon fibers to form lightweight yet ultra-strong tubes or rods of up to 14 meters in length.

...More >>

Baldor Electric Company Baldor Electric Company
5711 RS Boreham Jr - POB 2400
Fort Smith AR 72901 US
Phone: 479-646-4711
Website: www.baldor.com


Ethernet-compatible Motion Control System Automates Unique Woodworking Process
Baldor Ethernet Motion Control System

Cog-free linear motion controls precision sanding of fret boards for famed acoustic guitar maker. ...More >>

Baldor Electric Company Baldor Electric Company
5711 RS Boreham Jr - POB 2400
Fort Smith AR 72901 US
Phone: 479-646-4711
Website: www.baldor.com


Galil Motion Controllers Help Scientists Investigate Atomic Structures, Chemical Reactions and Biological Processes
ANSTO-Neutron-Beam-Instrumentation-Project

Galil's Ethernet motion controllers were selected by the Australian Nuclear Science and Technology Organization (ANSTO) for Australia's Neutron Beam Instrumentation Project (NBIP). Designed to investigate the atomic structure of new materials, understand the ...More >>

Galil Motion Control Galil Motion Control
270 Technology Way
Rocklin CA 95765 US
Phone: 916-626-0101
Website: www.galilmc.com


High-Powered Ethernet-Compatible Three Phase AC Motor Drives Simplify Machine Building for Continuous Processing and Heavy Manufacturing
MotiFlex e100 three-phase AC drive by Baldor

Extend system-level benefits to printing, converting, plastics, paper, textiles

Baldor has extended its range of three-phase AC motor drives compatible with the Ethernet-compatible Powerlink protocol, adding three higher power versions rated for continuous outputs from 21.5 to 33.5A. The new drives extend the significant system building advantages of Powerlink to a much wider range of continuous and heavy-duty applications, including printing, papermaking, converting, textiles, plastics and steel production.

Called MotiFlex e100, the three-phase AC drive range now offers eight choices

...More >>

Baldor Electric Company Baldor Electric Company
5711 RS Boreham Jr - POB 2400
Fort Smith AR 72901 US
Phone: 479-646-4711
Website: www.baldor.com


CPX/FEC – Front End Embedded Controller by Festo
Festo CPX FEC Front End Embedded Controller

The CPX modular electrical terminal is now available with an embedded PLC. The CPX-FEC results from the integration of the Festo front-end controller (PLC) into the modular CPX electrical terminal.

Basic features:

  • IP 65/IP 67 protection
  • Easy to install with integrated controller for mounting directly onto the machine (all on one valve terminal, no need for a cabinet)
  • Ethernet capability – 10-100 mbps data transfer rate, unlimited distances
...More >>

FESTO Corp FESTO Corp
395 Moreland Road
P.O. Box 18023
Hauppauge NY 11788 US
Phone: 631-435-0800
Website: www.festo-usa.com


Festo Offers Modular Valve Manifolds with Ethernet
Modular Valve Manifolds with Ethernet by FestoFesto, a worldwide leader in automation components and systems, offers a comprehensive range of Ethernet-enabled highly modular IP65 valve manifolds via its CPX I/O system.  Protocols include Ethernet/IP, Modbus TCP, standard IT protocols, and further industrial protocols in preparation.  Easy-to-use and efficient, CPX features a plug & work®  design that eliminates the installation costs associated with hardwiring I/O to pneumatic valves ...More >>

FESTO Corp FESTO Corp
395 Moreland Road
P.O. Box 18023
Hauppauge NY 11788 US
Phone: 631-435-0800
Website: www.festo-usa.com


Dual-Standard CANOpen/Ethernet Powerlink Servo Drive Provides Elegant Migration Path For Machine Builders
CANopen and Ethernet Powerlink Servo Motor Drives by Baldor ElectricA new generation of servo motor drive from Baldor Electric Company, with both CANopen and Ethernet Powerlink interfaces, is offering a powerful migration path for motion automation builders currently using positioning drives compatible with the CANopen DSP 402 standard. Many machinery builders use the CANopen fieldbus standard because of its low cost per node, simple wiring, and wide product support - from 400+ vendors worldwide. The DSP 402 profile for positioning drives is often used in combination with an OEM's custom control software and hardware - an area in which many man-years of investment has often been made. The decision of the EPSG - the group controlling the Ethernet Powerlink real-time Ethernet standard - to work with the CANopen standards body and adopt the DSP 402 profile ...More >>

Baldor Electric Company Baldor Electric Company
5711 RS Boreham Jr - POB 2400
Fort Smith AR 72901 US
Phone: 479-646-4711
Website: www.baldor.com


Baldor Offers an Introduction to Real-Time Ethernet Motion Control
Ethernet Guide to Real-Time Motion & Control by BaldorBaldor has published a guide to the use of Ethernet in real-time motion and machinery control applications. The free 28-page document is designed for automation engineers and managers, and introduces the technology in a way that contrasts the control approach with conventional system architectures. The guide starts by describing the industry-standard Ethernet Powerlink protocol and its deterministic features. It then contrasts a conventional machine control system architecture requiring servo motor based motion and other industrial I/O, with a new system based on Ethernet. The publication concludes by introducing programming tools, and detailing a range of Ethernet compliant machine controllers and servo drives, plus related machine control accessories including motors and HMIs. ...More >>

Baldor Electric Company Baldor Electric Company
5711 RS Boreham Jr - POB 2400
Fort Smith AR 72901 US
Phone: 479-646-4711
Website: www.baldor.com


TRIO MOTION TECHNOLOGY Announces Ethernet Modbus/TCP
TRIO MOTION TECHNOLOGY Announces Ethernet ModbusTCPLeading motion control manufacturer, Trio Motion Technology, announces Modbus TCP/IP communications using its ethernet interface.

MODBUS TCP/IP allows the widely used MODBUS protocol to be used over ETHERNET TCP/IP networks. For Trio users it provides a simple and effective means of transmitting data between a suitable PLC, or PC, and a Motion CoordinatorTM system.

The Ethernet Daughter Board, when interrogated by a client, auto switches to a MODBUS port (502), and will read/write directly from/to the Trio VR global variables when the MODBUS holding register functions are used, or read/write from the Trio IO when the coil & input status functions are used.

Further expanding the unique daughter board concept, the new Ethernet board features “plug and play” installation simplicity... ...More >>

Trio  Motion  Technology Trio Motion Technology
1000 Gamma Drive
Suite 206
Pittsburgh PA 15238 US
Phone: 412-968-9744
Website: www.triomotion.com


motion control news motion control rss motion control newsletter motion control twitter

imageimage
Companies in Motion
Search by Company Name A-Z
ABCDEFGHI
JKLMNOPQR
STUVWXYZ#
imageimage
Jobs in Motion

Control Systems Engineer
Vancouver, WA 98682

Hardware/Software Engineer
Ann Arbor, MI 48108

Regional Sales Engineer
San Jose, CA

Regional Sales Manager
Pittsburg, CA 94565

Regional Sales Manager - Motors/Actuators/Motion Control
San Jose / Bay area, CA 93021

More Jobs in Motion >>



imageimage
Products in Motion
Tecnotion BV
Tecnotion BV
Neugart USA, LP
Neugart USA, LP
Advanced Micro Controls, Inc.
Advanced Micro Controls, Inc.
Allied Motion Technologies, Inc.
Allied Motion Technologies, Inc.
Roboteq Inc
Roboteq Inc
iC-Haus GmbH
iC-Haus GmbH
Applied Motion Systems, Inc.
Applied Motion Systems, Inc.


 

Copyright © 1995 - 2010 Motioncontrol.com - A Motion Control Marketing, Inc. Company - Long Island Web Design