|
DC Motor ProductsRoboteQ Smart 7.5KW Brushless DC Motor Controller Targets Small Electric Vehicles and Robotics  Roboteq, Inc introduces an intelligent controller capable of directly driving a brushless DC up to 150Amps at up to 50V. The BL1650 is targeted at designers of electric bikes or karts, mobile robots, or any other high power brushless motor control application. The controller accepts commands from either analog pedal/joystick, standard R/C radio for simple remote controlled robot applications, or RS232 interface. Using the serial port, the BL1650 can be used to design fully or semi-autonomous robots by connecting it to single board computers, wireless modems or WiFi adapters ...More >>Piezo Ceramics for Medical Applications from PI  Auburn, MA - A new brochure from piezo specialist PI on medical applications of piezo ceramic actuators and components which illustrates the many advantages over classic motion control components ...More >> Sensitron SMCV Configuration Utility  Sensitron now offers a Graphic User Interface (GUI) Configuration Utility that supports the development and testing of the SMCV Series of Field Oriented Sinusoidal Motor ...More >> Aerotech IP66 Rated Direct Drive Rotary Stages Bring High Accuracy Motion to Hostile Environments
BX4 motors with integrated compact electronics by MicroMo Electronics  The BX4 Series from FAULHABER has just been expanded by twelve new 32mm Brushless DC-Servomotors! The features of the BX4 line are long operational lifetime, a high cogging-free output torque and no adhesive bonded joints. This makes them ideal for many applications like robotics, automation, medical, machinery, aerospace and aviation. The new BX4 series brushless motors are available in two lengths of 42 or 68 mm and in 12 or 24 V windings
...More >>
RoHS Compliant High Power Brushless DC Motor & Driver Package by Oriental Motor  ORIENTAL MOTOR, USA CORP. offers the RoHS compliant high output power 200 watt (BLF 6200 series) and 400 watt (BLF 6400 series) brushless DC motor and driver speed control package. Packed with new features, the BLF driver box controls the Oriental Motor brushless dc motor from 80 to 4000 rpm, a speed range of 50:1, with a total speed regulation of 0.6% due to specified load, voltage and temperature variations....More >> RoHS Compliant Brushless DC Motor and Compact Driver by Oriental Motor  ORIENTAL MOTOR USA CORP. offers the BLU speed control package composed of a brushless dc motor and a cased driver with power supply. The motor can be connected easily by plugging the motor connector into the driver. The motor speed can be directly set using the potentiometer control knob located on the front panel. The power supply line up is available in 115 vac single phase, 230 vac single phase, and 230 vac three phase.The RoHS compliant BLU series consists of three models ranging from 20 watts (60mm), 40 watts (80mm) and up to 90 watts (90mm) output power. ...More >> RoHS Compliant Brushless DC Motor and Compact Driver from Oriental Motor  ORIENTAL MOTOR USA CORP offers the BLH speed control package composed of a brushless dc motor and a 24 VDC compact driver board. The RoHS compliant BLH series encompasses four models ranging from 15, 30, 50 and 100 watts output. The BLH possesses speed regulation accuracy of + 0.5%. The BLH brushless DC motor can be operated at precise speeds from 100 rpm up to 3000 rpm.There are two gearhead types available, the parallel shaft gearhead and the hollow shaft flat gearhead with a wide variety of gear ratios. ...More >> Medical Design Solutions with Piezo Motors and Hexapod Robots by PI  Piezo & Motion Control Specialist PI (Physik Instrumente) has published a brochure on advanced motion control solutions for medical design. ...More >> Bison Gear Sensorless Brushless Gearmotors Eliminate Position Sensors and Wiring  In response to OEMs seeking higher energy efficiency and power density as well as simpler assembly and increased design life for their equipment, gearmotor and electric motor manufacturer, Bison Gear & Engineering Corp. introduces its new line of sensorless brushless DC (SBLDC) parallel shaft gearmotors with powers up to 1/6 hp (124 watts). The new 34 frame AUTONOmotorTM gearmotors are powered by totally enclosed, nonventilated (TENV) brushless motors that are sensorless to reduce cost, size, and wiring complexity while offering improved reliability and noise immunity compared to brushless motors with shaft mounted rotor position sensors.
...More >>
High Performance Motors for Aircraft Use ARC Systems, Inc. offers High Performance Motors with Integral Brakes, Tachometer Feedback, Electronic Feedback, and/or Gear Heads for Aircraft use. These high performance motors have various aircraft uses. To list some of the applications we have designed and manufactured for:
The latest Brushless Flat DC-Micromotors in two diameters with integrated electronics by MicroMo  MICROMO expands its line of FAULHABER flat DC micromotors. The two new offerings provide diameters of 15mm and 26mm. The new precious metal commutated DC micromotors provide robustness and electronic commutation. With nominal voltages of 6 or 12 volts, the 15 mm diameter motor provides a continuous output torque of 0,6 mNm. The 26 mm diameter version provides output of 3,8 mNm. Also, the output torque can be increased up to 30 or 100 mNm with gearmotor versions of the new drives.
...More >>
Ultra-Precise Positioning Achieved with Zero-Backlash Rack & Pinion Drives from ATLANTA Drive Systems  ATLANTA Drive Systems, Inc. offers a range of zero-backlash rack & pinion drives that eliminate system backlash by means of a split-pinion and dual-pinion arrangement, providing ultra-precise positioning and repeatability. Positioning accuracy is maintained during acceleration and deceleration, as well as for direction of travel reversals. The backlash is eliminated by using two pinions - one to drive the axis and the other to engage the opposite tooth flank and take up the backlash. Mechanically preloaded split-pinion drives utilize an axial spring to load one pinion half against the other. Electrically preloaded dual-pinion drives utilize two motors, each driving one pinion, which are loaded against each other by means of a special motor controller. ...More >>Bespoke Wiper Systems from Parvalux Electric Motors  In conjunction with a key strategic partner, Parvalux have developed a range of two-speed self-parking windscreen-wiper motors for applications such as rolling stock, marine and automotive. A new brief was received to offer a windscreen motor across a range of applications that would minimize the number of mechanical interfaces. Under the guidance of our Key Accounts Manager, Rudy Dias, the specification was laid down for a completely new design. The team incorporated all the required features including a novel wiring solution that removes external wiring between the parking plate and the motor. A rapid prototype from SLS (selective laser sintering) was produced which incorporated this wiring loom and a new gear-set. ...More >>KineteX 32 Brushless DC Pump Motor Offered by Premotec of Allied Motion Technologies  Premotec, an Allied Motion Technologies company, has expanded its KineteX family of outer-rotor high performance integrated-drive brushless DC motors with the release of the KineteX 32 EB series.The KineteX 32 EB is 32 mm in diameter and only 42 mm long, including its integrated speed control drive. It is rated at 16 Watts continuous, making it one of the highest torque density motors of this size. ...More >> Brushless Motors/Alternators Used in Down Hole Drilling Applications  Hauppauge, NY -- ARC Systems, Inc. offers a complete line of Specialty Brushless DC Motors/Alternators for Down Hole Drilling Excavation. These motors are designed with High Energy Materials enabling us to meet and exceed the rigid performance requirements of our customers. Available in sizes 8, 10, 12, 15, 18, and 33, these Brushless DC Motors are also ideal for applications such as pumps, packaging, medical, industrial, aerospace, and robotics. These motors are environmentally protected and ideal for a variety of applications where hazardous conditions such as fumes or particles may be present. ...More >>Parvalux Plastic gearboxes  We are specialist suppliers to several major international designers of powered golf buggies, caddies and carts with bespoke DC permanent magnet power transmission units; and in many cases we are asked to develop lightweight plastic gearboxes to enable greater portability of the product into and out of vehicles and storage facilities.But less weight is not the only advantage of using modern plastics technology with which to develop geared-motor solutions. Price, development time and design aesthetics also play a huge part in the selection of the gearbox material. ...More >>Specialty Motors from Wittenstein  Superior technology creates optimal solutions Building upon decades of engineering expertise and manufacturing optimizations, Wittenstein launches capabilities to offer specialty motors in North America. Wittenstein servo technology is used in traditional motion solutions for robotics, packaging, life science and aerospace. Moving motion to the next level for Wittenstein means identifying customer needs and designing optimal solutions which will propel companies forward in the competitive world of motion. ...More >>High torque in compact format  DC-Micromotors, series 2237 … CXR With the DC-Micromotor series 2237 ... CXR, FAULHABER has added a new generation of graphite commutated motors to its drive range. The CXR series was developed on the basis of the tried and proven CR series concept. Its outstanding features are long life and extreme robustness. In its compact format – 37 mm long and 22 mm in diameter – the drive is able to utilize its full dynamic range with a continuous torque of 11 mNm in many different applications. ...More >>10 Things Everybody Ought to Know About Custom Gearmotors  White paper details key considerations in making standard vs. custom decision with emphasis on maximizing overall lifetime value for electromechanical machinery and equipment designs. St. Charles, IL - September 17, 2009 - With heightened focus on budgets and time to market, engineers continue to face a quandary when designing new electromechanical machines and equipment: whether to design "around" a standard off-the-shelf gearmotor or to specify a custom gearmotor meeting their exact requirements. In response to growing concerns on this issue, Bison Gear & Engineering Corp. has analyzed its customer interactions and relationships and produced a new white paper covering the "10 Things Everybody Ought to Know About Custom Gearmotors". ...More >>Miniature hexapod with great freedom of movement  The tried-and-tested parallel kinematics hexapod systems from Physik Instrumente (PI) provide precise positioning in six axes with precisions below 1 µm. The new miniature M-810 hexapod takes up only minimal installation space. With a diameter of only 10 cm and a height of 118 mm it provides travel ranges up to 40 mm in the XY-plane and up to 13 mm in the Z-direction. The high-precision brushless special DC motors and high-resolution encoder give each individual strut a positioning resolution of a mere 40 nm. The mini-hexapod reliably positions loads up to 5 kg and achieves speeds of up to 10 mm/s. ...More >>XY Voice Coil Positioning Stage from H2W Technologies  The VCS20-020-CR-001-XY voice coil positioning stage offers xy motion using non commutated dc linear actuators, "voice coil motors". Each axis of motion allows for up to 2 inches of stroke for a total motion area of 4 square inches. Each axis is capable of 2 pounds continuous and 6 pounds peak forces. High end linear crossed roller bearings are used which allow for heavy payloads while maintaining minimal friction. Coupled with a 0.1 micron resolution linear optical encoder; high accuracy and repeatability is achievable. ...More >> NEW! Integrated Internal Bearings on Moving Coil Voice Coil Motors from H2W Technologies  H2W Technologies Voice Coils are ideal for short stroke (typically less than 2 inches) closed loop servo applications. Their compact size allows them to fit into small spaces. They have very low electrical and mechanical time constants. The low moving mass allows for high accelerations of light payloads. These actuators are wound in such a way that no commutation is required for motion to occur. The result is a much simpler and more reliable system. Generally moving coil voice coils have required an external bearing system; however H2W has integrated an internal bearing system that does not add to the outside diameter of the actuator. This is also an inexpensive alternative to the voice coil stage. An additional option for this actuator is the integration of springs, which allow the actuator to operate open loop in oscillatory applications. ...More >> Miniature Piezo Motor Demo Kit available on PI Online-Store  PI's patented P-653 piezo motor linear slide is significantly smaller than other miniature linear stages and provides significantly higher velocities and resolution. This true linear motor system (no conversion of rotation) consists of only 4 parts and can replace classical drive elements like miniaturized motor/lead screw systems or other linear motors, which P-653 outclasses with its speed of up to 200 mm/sec (8"/sec) and auto-locking feature. Integration of the P-653 is simple because the moving slider and the piezo motor are delivered assembled as a unit on a PCB driver board running on 5 VDC. ...More >> White Paper: A Practical Use Of The Motor Constant KM  DC Motor/Generator Technical Note. A Practical Use Of The Motor Constant KM. An Aid In The Selection Of DC Motors Or Generators In Power Limited Or Efficiency Sensitive Applications.Frequently a dc motor or generator specification will include the value of the motor constant KM, which is the torque sensitivity divided by the square root of the winding resistance. Oftentimes even seasoned dc motor applications specialist will view this intrinsic motor property as a somewhat esoteric figure of merit useful only to the motor designer. The feeling is that motor constant KM has no real practical value in selecting and dc motors and generators in the real world. Nothing could be further from the truth! Utilizing this figure of merit properly will substantially reduce the iterative process in selecting a dc motor or generator since it is generally winding independent in a given case or frame size motor or generator from a given vendor. ...More >>New Permanent Magnet DC Gearmotors Offer Full-Featured Integral Speed Control Option  Bison Gear & Engineering introduces six standard models of new parallel shaft permanent magnet DC gearmotors with continuous torque ratings from 30 to 500 in-lbs. (3.4 to 56.5 N-m). The new VWDIR134 DC gearmotors are available with 1/10 or 1/11 horsepower (74.6 or 67.8 watts) 90 volt brushed DC electric motors. The compact, integral gear reducers feature hardened steel helical and spur gearing for efficiency and durability, with ratios ranging from 10:1 to 266:1 and corresponding fixed output speeds from 152 to 6 RPM. The gearmotors feature built-in face mounting, compatible with Von Weise Genesis mounts, and offer overhung load (OHL) capability of 300 lbs. (136.4 kg.). For added versatility, these gearmotors also accept the new Bison TightDriveTM speed control. ...More >> MicroMo BX4 Brushless Motors Constructed with No Adhesives-bonded Joints  With the introduction of the BX4 series of brushless DC servomotors, MicroMo and the FAULHABER-Group once again underscores its position as an innovative market leader in highly integrated miniature drive systems. ...More >> Voice Coil Air Bearing Stage by H2W Technologies  This stage was built for a customer who was attempting to move at 20Hz over a short stroke (0.1"). H2W was replacing a similar voice coil stage which had a ball slide bearing assembly. After several million cycles, the friction of the steel balls wore an indentation in the bearing assembly, thus preventing smooth continuous motion of the slide. The stage was modified using New Way Air Bearings. The Air Bearings allow for smooth, frictionless motion without the worry of wear, and allowing for many millions of cycles. The frictionless air bearing makes long life possible.
...More >>
New 32 mm Brushless DC Motor with Integrated Drive by Allied Motion Technologies  Premotec, an Allied Motion Technologies company, has expanded its BL family of high performance integrated-drive brushless DC motors with the release of the BL 30 EB series. The BL30 EB is 32 mm in diameter and only 42 mm long, including its integrated speed control drive. This compact powerful 11 Watt motor produces 30 mNm of torque at 3500 RPM, making it among the highest torque density motors of this size class. ...More >> New PMDC Dual Drive Gearmotors by Allied Motion  Watertown, NY - Allied Motion Technologies announces the availability of its DAA series Dual Drive gearmotors. DAA series designed for zero turn radius medical mobility and automatic guided utility vehicles... ...More >> H2W Techologies' Limited Angle Torque Motors Feature High Acceleration and Ripple Free Motion  Limited Angle Torque Motors or "Torquers" as they are commonly referred to are the rotary actuator of choice when high torque, high acceleration, extremely smooth motion, high reliability, and high precision are required. H2W Technologies manufacturers "Torquers" that have applications from below sea level to outer space. These single phase, brushless, low profile motors, vacuum compatible to 10^5 torr, are ideal for: Operating valves, control surfaces on submersible watercraft, aerospace fin actuation, precision ball screw rotation, and positioning laser reflecting mirrors.
...More >>
New Bison Gear & Engineering Right Angle DC Gearmotors Offer Versatile Backward Compatibility  Permanent magnet, worm geared motors feature all-position mounting, multiple output shaft configurations and optional integral speed control. To meet the needs of a growing number of OEMs seeking alternate gearmotor suppliers for not only new, but also legacy, equipment designs Bison Gear & Engineering Corp. introduces a new series of fractional horsepower DC gearmotors featuring right angle worm gearing. ...More >> New Stationary or Battery Power DC Gearmotors are Von Weise Drop-In Replacements  Compact permanent magnet, parallel shaft gearmotors available for either 12V or 90V DC input, with output torque up to 50 in-lbs. ...More >> Bison Gear Debuts Pair of Parallel Shaft Von Weise Drop-In Replacement Gearmotors  New Bison gearmotors are available in AC 115/230V, 60/50 Hz and also permanent magnet DC 12V and 90V; torques to 600 in-lbs. ...More >> Bison Gear Offers Right Angle AC/DC Von Weise Drop-In Replacement Gearmotor  New universal gearmotor operates on 115V AC, 60 or 50 Hz, or 115V DC and offers versatility in mounting, output shafts and speed control. ...More >> Bison Gear Introduces New Commercial Duty Gearmotor Product Line  Bison Gear & Engineering offers its new VWDIR line of fractional horsepower gearmotors designed as Von Weise Drop-In Replacements encompassing over 75 standard models of AC and DC parallel shaft and right angle gearmotors. ...More >> PI Piezo Ceramic Motors Keep Shrinking  PI's patented P-653 piezo motor linear slide is significantly smaller than other miniature linear stages and provides significantly higher velocities and resolution. This true linear motor system (no conversion of rotation) consists of only 4 parts and can replace classical drive elements like miniaturized motor/lead screw systems or other linear motors, which P-653 outclasses with its speed of up to 200 mm/sec (8"/sec) and auto-locking feature. ...More >> PI's Ceramic Replacement Actuators are Non-Magnetic, Vacuum Compatible, Fast  PI's new line of compact ceramic piezo motors & nanopositioning actuators replaces classical actuators & motion control components in precision motion control applications ...More >>3D Solid Motor Models by QuickSilver Controls  QuickSilver Controls now has solid models for its motors and controllers. ...More >>DC Motor - Low-cost Powerhouse by MicroMo Electronics  22mm Low-cog DC Micromotor with Graphite Commutation Micro-Drives announces the Series M2232U. The low-cog DC micromotor has an 22 mm external motor-diameter with a 32 mm length. The low-cog rotation is achieved through a combination of skewed laminations and a tapered permanent magnet system. The DC micromotor can achieve a stall torque of 25.62 mNm and speeds of up to 10,000 rpm.
...More >>
Powerful, Lightweight Brushless DC Motor by MicroMo Electronics  Ø3mm Brushless DC Servomotor MicroMo Electronics, Inc. announces the expansion of its Brushless DC motor product line with the new version of the Smoovy Series 0308…B. This new version of the brushless DC motor uses the “System FAULHABER” skewed winding in combination with a rotor made of Neodymium rare-earth magnets to provide cog-free motion. ...More >>Parker Releases MPJ Servo Motor  Customers get higher inertia and a better solution for industrial applications Rohnert Park, CA – Parker’s Electromechanical Automaton Division, a leading supplier of motion control technology, announces the release of the MaxPlus-J (MPJ) motor. Designed for the demanding applications found in today’s high-performance servo systems, MPJ motors offer the same design specifications as Parker’s popular MPP (MaxPlusPlus) motors but give users even higher inertia. The secret to the MPJ’s extra boost of inertia is ...More >>DC Motor - Rapid Prototyping with Micro Brushless DC Motors  Starter Kit for Micro Brushless DC Motors MicroMo Electronics, Inc. announces the release of a Microsystems Starter Kit with Synchronous Drive Systems. The Microsystems Starter Kit contains drive electronics, an adaptor board, and a motor and was developed to allow a design engineer to simply and quickly get started with a MicroMo miniature synchronous motor. The Microsystems Starter Kit is available with DC Brushless motors series 0206…B, 0308…B and 1202…BS/BH. ...More >>FAULHABER's DC-Micromotors have a Self-supporting Skew-wound Copper Coil  The main difference between FAULHABER DC-Micromotors and conventional DC motors is in the rotor. The winding does not have an iron core but consists of a self-supporting skew-wound copper coil. This featherweight rotor has an extremely low moment of inertia, and it rotates without cogging. The result is the outstanding dynamics of FAULHABER motors. For low power motors, commutation systems using precious metals are the optimum solution because of their low contact resistance. ...More >>Micro-Drives Expands Its DC Micromotor Product Line with the Addition of the Series M4870U  The DC micromotor has an external motor-diameter of 48 mm and a length of 70 mm. The DC micromotor can achieve a stall torque of 42.7 mNm and speeds of up to 11,000 rpm. The DC micromotor has an iron-core construction and possesses a graphite commutation systemwhich ensures long-life even under overload conditions. The 4.0 mm diameter motor shaft ensures high rotational stability. The Series M4870U DC Micromotor can be combined with a gearhead, encoder, and linear actuator for a complete miniature DC drive system. ...More >>DC Motor - SLH Series DC Motors  Allied Motion's SLH Series of Motors Offers DOUBLE the Performance of Slotted-type Brushless Motors New Small Slotless Brushless DC Motor Emoteq Corporation, an Allied Motion Technologies company, announces the availability of its new SLH series of small slotless brushless DC motors. These high performance size 5 (0.5-inch, 12.7mm diameter) motors were specifically designed for powering precision instruments such as surgical hand pieces and similar medical and dental power tools.
...More >>
DC Motor - Brushless Dc Servo Motor by MicroMo Electronics is Powerful and Sterilizable  20mm Brushless DC Servomotor MicroMo Electronics, Inc. announces the expansion of its Brushless DC motor product line with the addition of its Series 2057...B. With an external motor-diameter of only 20 mm and a length of 57 mm, the power to volume ratio is truly impressive. ...More >>DC Motor - Gearheads, Gearmotors, DC Motors and X-Y Positioning Stages  Parker Releases New Products & Systems Catalog Parker's Electromechanical Automation Division announces the release of a new catalog featuring its Bayside brand of motion and control systems products. The 240-page, full-color guide covers linear and rotary positioning stages, frameless kit dc motors, gearheads, integral gearmotors and a special section devoted to Parker Bayside's Engineered Solutions Group
...More >>
Small and Powerful - 12mm DC Micromotor with Precious Metal Commutation  MicroMo Electronics, Inc. announces the expansion of its DC Micromotor product line with the addition of its Series 1224...SR. With an external motor-diameter of only 12 mm and a length of 24 mm, the power to volume ratio is truly impressive. This is achieved through a combination of the "System FAULHABER" ironless rotor and Neodymium rare earth magnets to achieve a stall torque of 5.43 mNm and speeds of up to 13,800 rpm.
...More >>
MicroMo Offers a Ultra-compact 13mm Brushless DC Gear Motor  MicroMo Electronics, Inc. announces the addition of an ultra-compact brushless DC gear motor with the release of the Series 1307…BH and 1309…BH. The 1307…BH brushless gear motor has a diameter of 13 mm and a length of 7 mm and can achieve a continuous torque of 5 mNm with speeds up to 1,639 RPM. The 1309…BH brushless gear motor has a diameter of 13 mm and a length of 9 mm and can achieve a continuous torque of 5 mNm with speeds up to 592 RPM. The gear motor rotor is produced photolithographically rather than mechanically as is common in other motors. This allows for precise, synchronous operation without cogging. A maximum torque output of 10 mNm is achieved by the use of high-quality neodymium magnets. Due to their electronic commutation, the service life of these motors is only limited by the bearings. This makes these motors extremely useful for applications requiring a long service life or continuous operations such as micro-scanners, locking systems, chopper drivers, and medical dosing pumps.
...More >>
Electronically Commutated Endurance Runner by MicroMo Electronics  Ø15mm and Ø31mm Brushless DC Micromotors with Integrated Electronics MicroMo Electronics, Inc. announces the addition of a RoHS compliant line of brushless DC micromotors with integrated electronics with the release of the Series 1525…BRC and 3153…BRC. The 1525...BRC motor has a diameter of 15 mm and a length of 25 mm and can achieve a continuous torque of 1.8 mNm with speeds up to 16,000 RPM. The 3153…BRC motor has a diameter of 31 mm and a length of 53 mm and can achieve a continuous torque of 28 mNm with speeds up to 6,500 RPM. The motor uses the “System FAULHABER” skewed winding in combination with a rotor made of Neodymium rare-earth magnets to provide cog-free motion. Due to their electronic commutation, the service life of these motors is only limited by the bearings. This makes these motors extremely useful for applications requiring continuous operations such as pump, fan, or scanner drives.
...More >>
DC Motor - Brushless DC Motors for Servo Drives  ARC Systems offers high performance brushless DC motors for servo drives in motion control applications Our designs feature high torque to inertia ratios. We have the experience and the engineering expertise to meet virtually any motion control application. Along with our unique manufacturing processes, our internal capabilities provide low cost solutions for our customers. ARC can provide designs built to print or tailored to your specific requirements.
...More >>
INFRANOR USA has Mavilor® BLS/T Series Brushless Servo Motors  The Mavilor BL series Brushless DC or AC Servo Motors offer an extremely short, square format design with impressive output torques, high torque to weight ratios and extremely fast acceleration capabilities. Sinusoidal and trapezoidal models offer compatibility with a wide range of sine and trap amplifiers. The BL series is especially well matched with Infranor's SMTBD digital servo amplifiers. (see servo amplifiers for detailed drive information)With peak torque of from 42 - 1750 in-lbs, reaching rated speeds of from 2,200 - 10,000 rpm, weighing from 3.3 - 45 lbs, motor lengths of 5.0" - 12.6" and diameters 2.8" - 5.6". Features: Linear Kt to 6x Rated Current Compact, Brushless Motor Design Available w/integral Resolver, Hall Devices, Encoders and Brakes High Power/Weight ... ...More >> |
IP66: Protected against dust and water jets from any direction
